Free A10 Networks A10-System-Administration Exam Dumps Questions & Answers

Device 1 is the vMaster in a virtual chassis. Select the command set that adds an IP address to VE interface
200 on device 3?

• A.interface ve 3/200 ip address 198.162.4.1 /24
• B.interface ve 200 device 3 ip address 198.162.4.1 /24
• C.interface device-context 3 interface ve 200 ip address 198.162.4.1 /24
• D.vcs device-context device 3 interface ve 200 ip address 198.162.4.1 /24

Given the following "show vcs summary" output, which statements are true about the virtual chassis set?
(Choose three.)

• A.This is aVCS set-id 1.
• B.The aVCS vMaster of the set can always be accessed at IP Address 224.0.0.210.
• C.The aVCS vMaster of the group can always be accessed at IP Address 1.0.0.1.
• D.Three devices were configured as part of the virtual chassis.
• E.The command was run from device 3 of the set.
• F.The command was run from the aVCS vMaster.

In a VRRP-A topology that contains four devices, select the number of devices on which a single VRID can be simultaneously active?

• A.2
• B.3
• C.4
• D.1

ACOS can log the following accounting records for administrative sessions:

• A.command entry attempts only
• B.device access and command entry attempts
• C.device access attempts only
• D.syslog errors of severity greater than a specified level
• E.syslog errors of a specified severity level

In the following configuration:

Where network 3.0.0.x on each device is on a VE interface dedicated to aVCS traffic, what must you do to ensure that command "device-context x" always succeeds?

• A.Verify the interface is untagged on each device.
• B.Enable management service ssh on that interface for each device.
• C.Configure vcs floating-ip on network 3.0.0.0 /24.
• D.Apply acl "permit 3.0.0.0 /24" on that interface for each device.