Free API API-SIEE Exam Dumps Questions & Answers

Which document should identify the inspection activities to be performed by the assigned source inspector and include the applicable acceptance criteria?

• A.Inspection and Test Plan (ITP)
• B.Purchase requisition
• C.Shipping release form
• D.Supplier observation report

When might a resident source inspector be required at a shop during manufacture and fabrication?

• A.When the risk assessment classifies the equipment item as highest risk
• B.When the source inspector would have to travel long distances each day to the shop
• C.When the item is procured from a foreign source
• D.When the shop is fully loaded with items to be fabricated and schedule is tight

According to API 541, prior to mechanical running test, each mounting foot shall be checked for "soft feet." How is this check conducted?

• A.A dial indicator is oriented vertically and zeroed prior to base bolt tightening with a reading taken after tightening to confirm movement is within tolerance
• B.Mounting bolt torque is verified with a calibrated torque wrench with no visible gaps observed between the foot and base interface
• C.Feeler gauges are used at the foot to base interface to verify gap tolerance has not been exceeded
• D.After torquing mounting bolts, a vertically oriented, zeroed, dial indicator is attached to each foot and a reading taken after loosening of the bolt torque to verify movement is within tolerance

According to ANSI/IEEE C37.20.2, wiring across a hinge shall be all of the following except:

• A.sufficiently flexible to withstand repeated door movement without sustaining damage to wire strands or insulation.
• B.No. 14 AWG and larger, and C or D stranding.
• C.a formed loop as it crosses the hinge and secured to the equipment at both ends in such a manner that negligible strain is transmitted to wire beyond the securements.
• D.installed in a flexible non-metallic conduit with a separate ground terminated at the door and at the switchgear ground bus and chosen per the minimum wire size table.

According to the referenced API standard in the guide, special purpose induction motors covered by API STD
541 are:

• A.375 kW (500 hp) and larger
• B.100 hp and larger
• C.250 hp and larger
• D.1000 kW and larger only