Refer to the image.

You have three VPCs: A, B, and C.
VPCs A and C are both peered with VPC B. The IP address ranges are as follows:
VPC A: 10.0.0.0/16
VPC B: 192.168.0.0/16
VPC C: 10.0.0.0/16
Instance i-1 in VPC A has the IP address 10.0.0.10. Instance i-2 in VPC C has the IP address 10.0.0.10. Instances i-3 and i-4 in VPC B have the IP addresses 192.168.1.10 and 192.168.1.20, respectively, i-3 and i-4 are in the subnet 192.168.1.0/24.
i-3 must be able to communicate with i-1
i-4 must be able to communicate with i-2
i-3 and i-4 are able to communicate with i-1, but not with i-2.
Which two steps will fix this problem? (Select two.)

• A.Create subnets 192.168.1.0/28 and 192.168.1.16/28. Move i-3 and i-4 to these subnets, respectively.
• B.Create subnets 192.168.1.0/27 and 192.168.1.16/27. Move i-3 and i-4 to these subnets, respectively.
• C.Change the IP address of i-2 to 10.0.0.100. Assign it an elastic IP address.
• D.Create a new route table for VPC B, with unique route entries for destination VPC A and destination VPC C.
• E.Create two route tables: one with a route for destination VPC A, and another for destination VPC C.

Comment: *

Name: *

Email: *

Verification: *

Your company needs to leverage Amazon Simple Storage Solution (S3) for backup and archiving. According to company policy, data should not flow on the public Internet even if data is encrypted. You have set up two S3 buckets in us-east-1 and us-west-2. Your company data center is located on the West Coast of the United States. The design must be cost-effective and enable minimal latency.
Which design should you set up?

• A.An AWS Direct Connect connection to us-east-1 and a Direct Connect connection to us-west-2.
• B.An AWS Direct Connect connection to us-west-2 and a VPN connection to us-east-1.
• C.An AWS Direct Connect connection to us-east-1.
• D.An AWS Direct Connect connection to us-west-2.

Comment: *

Name: *

Email: *

Verification: *