Free BICSI INSTC_V8 Exam Dumps Questions & Answers

What is the bend radius requirement for optical fiber cable when the cable is at rest?

• A.15 times the cables outside diameter
• B.10 times the cables outside diameter
• C.20 times the cables outside diameter

When bonding a shielded twisted-pair cable system, which of the following must be ensured to comply with proper grounding and bonding practices?

• A.Only the outer jacket is stripped back to expose the shield at the connector
• B.The drain wire or shield foil is securely bonded to the connecting hardware or patch panel that is connected to the TGB/TMGB
• C.The shield is folded back outside of the connector for easy visual inspection
• D.The cable shield is bonded to a non-conductive anchor to prevent ground loops

What is the maximum number of work areas that a CP should serve?

• A.3
• B.6
• C.12
• D.2

What is the maximum permissible amount of untwisting for category 5e cable and higher?

• A.12.7 mm (0.5")
• B.75 mm (3")
• C.25 mm (1")
• D.38 mm (1.5")

Unqualified workers must stay AT LEAST ____ from exposed energized conductors operating at 300 to
50,000 V.

• A.30 m (100')
• B.3 m (10')
• C.0.3 m (1')
• D.15 m (50")