- Home
- CIPS Certification
- L4M1 Exam
- CIPS.L4M1.v2026-08-18.q42 Dumps
Question 26
Describe 3 stages of the sourcing cycle that occur in the post-contract award stage (25 marks)
Correct Answer:
See the solution in Explanation part below.
Explanation:
How to approach the question
Your answer should provide details on 3 of the following:
- Contract Award and Implementation
- Warehouse Logistics
- Contract performance and Improvement
- Supplier Relationship Management
- Asset Management
Because the question is only asking for 3 stages, you're going to have to go much more into detail for each stage, giving lots of information about why each stage is important and examples. You could consider thinking of an example procurement you have done recently and explaining the stages for that. Or you could take a hypothetical procurement too. Either will get you the same marks. Pick the three that you can write the most about.
Essay Plan
Introduction - explain that sourcing of goods and the role of Procurement doesn't end once a contract is signed. There is ongoing management and processes which must be carried out to ensure success.
Paragraph 1 - Contract Performance and Improvement
This is about ensuring contract obligations are fulfilled. Contract administration includes P2P procedures, database management, budgeting / costs monitoring, reporting and dispute resolution
Procurement's role may be in managing contract performance through the use of SLAs and / or KPIs. This can be done via reporting, using a Supplier Scorecard and meeting regularly to discuss.
It's important KPIs are measured and that there are consequences for failing to meet them. An example of consequences could be using a Performance Improvement Plan.
Contract Management also includes updating the contract where required - e.g. issuing variations to contract and updating the change control log
Another important aspect of this is ensuring the costs remain within scope of the budget
Contract performance can be compared if you have several suppliers delivering the same goods- could use a Factor Rating Method.
Performance could be measured against several criteria such as on time deliveries, response time of supplier, number of complaints.
Paragraph 2 - Supplier Relationship Management
There is a difference between managing the contract and managing the supplier relationship. It's possible to have excellent contract performance and a terrible relationship. However, the two are generally linked- where there is a good relationship, the contract often performs well.
The supplier management approach depends on where the relationship falls on the relationship spectrum (e.
g. transactional or collaborative)
This involves; maintaining regular contact with the supplier, motivating the supplier, working collaboratively with them (e.g. on performance issues or resolving any disputes)
Incentivising the supplier leads to collaboration and mutual support
To assess or rank suppliers you could use a vendor rating method or supplier evaluation forms
Supplier relationship management may involve investing in the supplier- e.g. through training or technology sharing Paragraph 3 - Asset Management
Includes creating a post contract 'lessons-learned'
Assessments should be carried out to determine if business requirements have changed, whether the agreement is still required and fit for purpose, what can be learnt from the process and how improvements can be incorporated next time.
This is the final stage of the Procurement Cycle and takes us back to the start of cycle, which begins again when the item needs to be reprocured
Whole life costing should be considered at this stage: this is the total cost of ownership over the life of an asset. The concept is also known as life-cycle cost (LCC) or lifetime cost, and is commonly referred to as
"cradle to grave" or "womb to tomb" costs.
Generally used on large purchases such as machinery and vehicles. Full Asset Management may not necessary for direct cost items such as raw materials incorporated into final goods.
Considerations may include; costs of running the asset, how long it will perform, insurance, maintenance, opportunity costs, disposing of the asset.
Also consider environmental and social impacts of the procurement.
Conclusion - it is important that procurement are involved at every stage of the cycle, not just in the pre- award stages. Procurement can add value at every stage.
Tutor Notes
- Depending on the examples you choose to use, you could talk about how the type of item procured could impact on the different stages. For example, high risk purchases may require more contract management than low risk purchases, and capital expenditure items such as new machinery may require more attention to the Asset Management stage.
- You could also think about how procurement adds value at each of the stages.
- Study guide p. 79
Explanation:
How to approach the question
Your answer should provide details on 3 of the following:
- Contract Award and Implementation
- Warehouse Logistics
- Contract performance and Improvement
- Supplier Relationship Management
- Asset Management
Because the question is only asking for 3 stages, you're going to have to go much more into detail for each stage, giving lots of information about why each stage is important and examples. You could consider thinking of an example procurement you have done recently and explaining the stages for that. Or you could take a hypothetical procurement too. Either will get you the same marks. Pick the three that you can write the most about.
Essay Plan
Introduction - explain that sourcing of goods and the role of Procurement doesn't end once a contract is signed. There is ongoing management and processes which must be carried out to ensure success.
Paragraph 1 - Contract Performance and Improvement
This is about ensuring contract obligations are fulfilled. Contract administration includes P2P procedures, database management, budgeting / costs monitoring, reporting and dispute resolution
Procurement's role may be in managing contract performance through the use of SLAs and / or KPIs. This can be done via reporting, using a Supplier Scorecard and meeting regularly to discuss.
It's important KPIs are measured and that there are consequences for failing to meet them. An example of consequences could be using a Performance Improvement Plan.
Contract Management also includes updating the contract where required - e.g. issuing variations to contract and updating the change control log
Another important aspect of this is ensuring the costs remain within scope of the budget
Contract performance can be compared if you have several suppliers delivering the same goods- could use a Factor Rating Method.
Performance could be measured against several criteria such as on time deliveries, response time of supplier, number of complaints.
Paragraph 2 - Supplier Relationship Management
There is a difference between managing the contract and managing the supplier relationship. It's possible to have excellent contract performance and a terrible relationship. However, the two are generally linked- where there is a good relationship, the contract often performs well.
The supplier management approach depends on where the relationship falls on the relationship spectrum (e.
g. transactional or collaborative)
This involves; maintaining regular contact with the supplier, motivating the supplier, working collaboratively with them (e.g. on performance issues or resolving any disputes)
Incentivising the supplier leads to collaboration and mutual support
To assess or rank suppliers you could use a vendor rating method or supplier evaluation forms
Supplier relationship management may involve investing in the supplier- e.g. through training or technology sharing Paragraph 3 - Asset Management
Includes creating a post contract 'lessons-learned'
Assessments should be carried out to determine if business requirements have changed, whether the agreement is still required and fit for purpose, what can be learnt from the process and how improvements can be incorporated next time.
This is the final stage of the Procurement Cycle and takes us back to the start of cycle, which begins again when the item needs to be reprocured
Whole life costing should be considered at this stage: this is the total cost of ownership over the life of an asset. The concept is also known as life-cycle cost (LCC) or lifetime cost, and is commonly referred to as
"cradle to grave" or "womb to tomb" costs.
Generally used on large purchases such as machinery and vehicles. Full Asset Management may not necessary for direct cost items such as raw materials incorporated into final goods.
Considerations may include; costs of running the asset, how long it will perform, insurance, maintenance, opportunity costs, disposing of the asset.
Also consider environmental and social impacts of the procurement.
Conclusion - it is important that procurement are involved at every stage of the cycle, not just in the pre- award stages. Procurement can add value at every stage.
Tutor Notes
- Depending on the examples you choose to use, you could talk about how the type of item procured could impact on the different stages. For example, high risk purchases may require more contract management than low risk purchases, and capital expenditure items such as new machinery may require more attention to the Asset Management stage.
- You could also think about how procurement adds value at each of the stages.
- Study guide p. 79
Question 27
Provide a definition of a stakeholder (5 points) and describe 3 categories of stakeholders (20 points).
Correct Answer:
See the solution in Explanation part below
Explanation:
Essay Plan:
Definition of Stakeholder- someone who has a 'stake' or interest in the company. A person or organisation who influences and can be influenced by the company.
Categories of stakeholders:
1) Internal Stakeholders- these people work inside the company e.g. employees, managers etc
2) Connected- these people work with the company e.g. suppliers, mortgage lenders
3) External Stakeholders - these people are outside of the company e.g. the government, professional bodies, the local community.
Example Essay:
A stakeholder is an individual, group, or entity that has a vested interest or concern in the activities, decisions, or outcomes of an organization or project. Stakeholders are those who can be affected by or can affect the organization, and they play a crucial role in influencing its success, sustainability, and reputation. Understanding and managing stakeholder relationships is a fundamental aspect of effective organizational governance and decision-making and there are several different types of stakeholders.
Firstly, internal stakeholders are those individuals or groups directly connected to the daily operations and management of the organization. Internal stakeholders are key to success and are arguably more vested in the company succeeding. They may depend on the company for their income / livelihood. Anyone who contributes to the company's internal functions can be considered an internal stakeholder for example:
This category includes
1) Employees: With a direct influence on the organization's success, employees are critical internal stakeholders. Their engagement, satisfaction, and productivity impact the overall performance.
2) Management and Executives: The leadership team has a significant influence on the organization's strategic direction and decision-making. Their decisions can shape the company's future.
Secondly, connected stakeholders are those individuals or groups whose interests are tied to the organization but may not be directly involved in its day-to-day operations. Connected stakeholders work alongside the organisation and often have a contractual relationship with the organisation. For example, banks, mortgage lenders, and suppliers. These stakeholders have an interest in the business succeeding, but not as much as internal stakeholders. It is important to keep these stakeholders satisfied as the organisation does depend on them to some extent. For example, it is important that the organisation has a good relationship with their bank / mortgage provider/ supplier as failing to pay what they owe may result in the stakeholders taking legal action against the organisation.
This category includes:
1) Shareholders/Investors: Holding financial stakes in the organization, shareholders seek a return on their investment and have a vested interest in the company's financial performance.
2) Suppliers and Partners: External entities providing goods, services, or collaboration. Their relationship with the organization impacts the quality and efficiency of its operations.
Lastly external stakeholders are entities outside the organization that can influence or be influenced by its actions. This category includes anyone who is affected by the company but who does not contribute to internal operations. They have less power to influence decisions than internal and connected stakeholders. External stakeholders include the government, professional bodies, pressure groups and the local community. They have quite diverse objectives and have varying ability to influence the organisation. For example, the government may be able to influence the organisation by passing legislation that regulates the industry but they do not have the power to get involved in the day-to-day affairs of the company. Pressure groups may have varying degrees of success in influencing the organisation depending on the subject matter. This category includes:
1) Customers: With a direct impact on the organization's revenue, customers are vital external stakeholders. Their satisfaction and loyalty are crucial for the company's success.
2) Government and Regulatory Bodies: External entities overseeing industry regulations. Compliance with these regulations is crucial for the organization's reputation and legal standing.
In conclusion, stakeholders are diverse entities with a vested interest in an organization's activities. The three categories-internal, connected and external -encompass various groups that significantly influence and are influenced by the organization. Recognizing and addressing the needs and concerns of stakeholders are vital for sustainable and responsible business practices.
Tutor Notes
- The above essay is pretty short and to the point and would pass. If you want to beef out the essay you can include some of the following information for a higher score:
- Stakeholders can be harmed by, or benefit from the organisation (can affect and be affected by the organisation). For example a stakeholder can be harmed if the organisation becomes involved in illegal or immoral practices- e.g. the local community can suffer if the organisation begins to pollute the local rivers. The local community can also benefit from the organisation through increased employment levels.
- CSR argues organisations should respect the rights of stakeholder groups
- Stakeholders are important because they may have direct or indirect influence on decisions
- The public sector has a wider and more complex range of stakeholders as they're managed on behalf of society as a whole. They're more likely to take a rage of stakeholder views into account when making decisions. However, these stakeholders are less powerful - i.e. they can't threaten market sanctions, to withdraw funding, or to quit the business etc.
- The essay doesn't specifically ask you to Map Stakeholders, but you could throw in a cheeky mention of Mendelow's Stakeholder Matrix, perhaps in the conclusion. Don't spend time describing it though- you won't get more than 1 point for mentioning it. You'd be better off spending your time giving lots and lots of examples of different types of stakeholders.
- Study guide p. 58
Explanation:
Essay Plan:
Definition of Stakeholder- someone who has a 'stake' or interest in the company. A person or organisation who influences and can be influenced by the company.
Categories of stakeholders:
1) Internal Stakeholders- these people work inside the company e.g. employees, managers etc
2) Connected- these people work with the company e.g. suppliers, mortgage lenders
3) External Stakeholders - these people are outside of the company e.g. the government, professional bodies, the local community.
Example Essay:
A stakeholder is an individual, group, or entity that has a vested interest or concern in the activities, decisions, or outcomes of an organization or project. Stakeholders are those who can be affected by or can affect the organization, and they play a crucial role in influencing its success, sustainability, and reputation. Understanding and managing stakeholder relationships is a fundamental aspect of effective organizational governance and decision-making and there are several different types of stakeholders.
Firstly, internal stakeholders are those individuals or groups directly connected to the daily operations and management of the organization. Internal stakeholders are key to success and are arguably more vested in the company succeeding. They may depend on the company for their income / livelihood. Anyone who contributes to the company's internal functions can be considered an internal stakeholder for example:
This category includes
1) Employees: With a direct influence on the organization's success, employees are critical internal stakeholders. Their engagement, satisfaction, and productivity impact the overall performance.
2) Management and Executives: The leadership team has a significant influence on the organization's strategic direction and decision-making. Their decisions can shape the company's future.
Secondly, connected stakeholders are those individuals or groups whose interests are tied to the organization but may not be directly involved in its day-to-day operations. Connected stakeholders work alongside the organisation and often have a contractual relationship with the organisation. For example, banks, mortgage lenders, and suppliers. These stakeholders have an interest in the business succeeding, but not as much as internal stakeholders. It is important to keep these stakeholders satisfied as the organisation does depend on them to some extent. For example, it is important that the organisation has a good relationship with their bank / mortgage provider/ supplier as failing to pay what they owe may result in the stakeholders taking legal action against the organisation.
This category includes:
1) Shareholders/Investors: Holding financial stakes in the organization, shareholders seek a return on their investment and have a vested interest in the company's financial performance.
2) Suppliers and Partners: External entities providing goods, services, or collaboration. Their relationship with the organization impacts the quality and efficiency of its operations.
Lastly external stakeholders are entities outside the organization that can influence or be influenced by its actions. This category includes anyone who is affected by the company but who does not contribute to internal operations. They have less power to influence decisions than internal and connected stakeholders. External stakeholders include the government, professional bodies, pressure groups and the local community. They have quite diverse objectives and have varying ability to influence the organisation. For example, the government may be able to influence the organisation by passing legislation that regulates the industry but they do not have the power to get involved in the day-to-day affairs of the company. Pressure groups may have varying degrees of success in influencing the organisation depending on the subject matter. This category includes:
1) Customers: With a direct impact on the organization's revenue, customers are vital external stakeholders. Their satisfaction and loyalty are crucial for the company's success.
2) Government and Regulatory Bodies: External entities overseeing industry regulations. Compliance with these regulations is crucial for the organization's reputation and legal standing.
In conclusion, stakeholders are diverse entities with a vested interest in an organization's activities. The three categories-internal, connected and external -encompass various groups that significantly influence and are influenced by the organization. Recognizing and addressing the needs and concerns of stakeholders are vital for sustainable and responsible business practices.
Tutor Notes
- The above essay is pretty short and to the point and would pass. If you want to beef out the essay you can include some of the following information for a higher score:
- Stakeholders can be harmed by, or benefit from the organisation (can affect and be affected by the organisation). For example a stakeholder can be harmed if the organisation becomes involved in illegal or immoral practices- e.g. the local community can suffer if the organisation begins to pollute the local rivers. The local community can also benefit from the organisation through increased employment levels.
- CSR argues organisations should respect the rights of stakeholder groups
- Stakeholders are important because they may have direct or indirect influence on decisions
- The public sector has a wider and more complex range of stakeholders as they're managed on behalf of society as a whole. They're more likely to take a rage of stakeholder views into account when making decisions. However, these stakeholders are less powerful - i.e. they can't threaten market sanctions, to withdraw funding, or to quit the business etc.
- The essay doesn't specifically ask you to Map Stakeholders, but you could throw in a cheeky mention of Mendelow's Stakeholder Matrix, perhaps in the conclusion. Don't spend time describing it though- you won't get more than 1 point for mentioning it. You'd be better off spending your time giving lots and lots of examples of different types of stakeholders.
- Study guide p. 58
Question 28
Industry Sectors can be classified as Primary, Secondary and Tertiary. What is meant by an 'industry sector'? Describe the main characteristics of and types of business you will find in these. (25 marks)
Correct Answer:
See the solution in Explanation part below
Explanation:
How to approach this question
- The first question can be a simple introduction with a bit of extra detail. The main 'meat' to your essay is going to be explaining the three sectors, their characteristics and example businesses.
- Aim for three well explained characteristics as a minimum
Example essay
An industry sector refers to a broad category or grouping of businesses and economic activities that share similar characteristics and functions in the production and distribution of goods and services. These sectors are often classified into three main categories: Primary, Secondary, and Tertiary. Here are the main characteristics and types of businesses you will find in each of these industry sectors:
1. Primary Sector:
* Characteristics: The primary sector involves activities related to the extraction and production of raw materials and natural resources directly from the environment. This sector relies on nature and weather patterns: businesses in the primary sector are highly dependent on natural factors such as climate, weather, soil quality, and geographic location. These factors can significantly impact the productivity and profitability of primary sector activities. Extreme weather such as floods can severely impact this sector. Moreover there is a seasonality to this sector and many activities in the primary sector require a significant amount of manual labour, particularly in agriculture, fishing, and forestry. However, modern technology has also been integrated into some primary sector activities to increase efficiency.
* Types of Businesses: a. Agriculture: This includes farming, crop cultivation, livestock raising, and forestry. b. Mining and Extraction. c. Fishing and Aquaculture: Forestry and Logging: Includes the harvesting of timber and related activities.
2. Secondary Sector:
* Characteristic: The secondary sector focuses on the transformation of raw materials and intermediate goods into finished products. The main characteristic of the sector is that it requires high levels of machinery and industrial techniques. There is a reliance on technology. Secondly, the secondary sector adds significant value to the products compared to their raw material form. This value addition is achieved through processing, assembly, and quality control processes. The third main characteristic is standardisation: Manufacturing processes often involve standardization of components and processes to ensure consistency and quality in the final products. Standardization helps in economies of scale.
* Types of Businesses: a. Manufacturing: This sector includes factories and plants that produce tangible goods such as automobiles, electronics, textiles, and machinery. b. Construction: Involves the building and construction of structures like buildings, bridges, and infrastructure. c. Utilities: Companies providing essential services like electricity, gas, and water supply fall into this category.
3. Tertiary Sector:
* Characteristic: The tertiary sector is also known as the service sector and involves businesses that offer various services to consumers and other businesses. The main defining characteristic of this sector is Intangibility: Services are intangible and cannot be touched or held. They are often experienced directly by consumers through interactions with service providers or through the use of technology. Secondly, High Human Involvement: The tertiary sector relies heavily on a skilled and often highly educated workforce to deliver services effectively. This can include professionals such as doctors, lawyers, teachers, and customer service representatives. Lastly, Customization: Many services are customized to meet the specific needs and preferences of individual clients or customers. This personalization is a key characteristic of the tertiary sector. For example Legal Advice will always be different depending on the specific needs of the client.
* Types of Businesses: a. Retail and Wholesale: Businesses engaged in the sale of goods to consumers or to other businesses. b. Healthcare and Education: This includes hospitals, clinics, schools, colleges, and universities. c. Financial Services: Banks, insurance companies, and investment firms are part of this sector. d. Hospitality and Tourism: Hotels, restaurants, travel agencies, and entertainment venues fall into this category. e. Professional Services: Legal, accounting, consulting, and IT services are part of the tertiary sector.
These industry sectors represent the different stages of economic activity, with the primary sector providing raw materials, the secondary sector processing and manufacturing goods, and the tertiary sector offering services and distribution. Together, these sectors form the backbone of an economy, contributing to its growth and development Tutor Notes
- I've gone overboard on naming the types of organisation in the different sectors. You don't have to remember all of these. 3 examples is sufficient to get good marks. I've just named them all so you can see what could be considered a right answer.
- Some people are talking about Quaternary and Quinary Sectors. CIPS is not one of those people, so don't worry if you come across those terms in any further reading. But FYI
1.
* Quaternary Sector: This sector involves knowledge-based activities, including research and development, information technology, and data analysis.
* Quinary Sector: The quinary sector comprises high-level decision-making and leadership roles in areas such as government, academia, healthcare, and top-level corporate management.
- LO 4.1 p.196
Explanation:
How to approach this question
- The first question can be a simple introduction with a bit of extra detail. The main 'meat' to your essay is going to be explaining the three sectors, their characteristics and example businesses.
- Aim for three well explained characteristics as a minimum
Example essay
An industry sector refers to a broad category or grouping of businesses and economic activities that share similar characteristics and functions in the production and distribution of goods and services. These sectors are often classified into three main categories: Primary, Secondary, and Tertiary. Here are the main characteristics and types of businesses you will find in each of these industry sectors:
1. Primary Sector:
* Characteristics: The primary sector involves activities related to the extraction and production of raw materials and natural resources directly from the environment. This sector relies on nature and weather patterns: businesses in the primary sector are highly dependent on natural factors such as climate, weather, soil quality, and geographic location. These factors can significantly impact the productivity and profitability of primary sector activities. Extreme weather such as floods can severely impact this sector. Moreover there is a seasonality to this sector and many activities in the primary sector require a significant amount of manual labour, particularly in agriculture, fishing, and forestry. However, modern technology has also been integrated into some primary sector activities to increase efficiency.
* Types of Businesses: a. Agriculture: This includes farming, crop cultivation, livestock raising, and forestry. b. Mining and Extraction. c. Fishing and Aquaculture: Forestry and Logging: Includes the harvesting of timber and related activities.
2. Secondary Sector:
* Characteristic: The secondary sector focuses on the transformation of raw materials and intermediate goods into finished products. The main characteristic of the sector is that it requires high levels of machinery and industrial techniques. There is a reliance on technology. Secondly, the secondary sector adds significant value to the products compared to their raw material form. This value addition is achieved through processing, assembly, and quality control processes. The third main characteristic is standardisation: Manufacturing processes often involve standardization of components and processes to ensure consistency and quality in the final products. Standardization helps in economies of scale.
* Types of Businesses: a. Manufacturing: This sector includes factories and plants that produce tangible goods such as automobiles, electronics, textiles, and machinery. b. Construction: Involves the building and construction of structures like buildings, bridges, and infrastructure. c. Utilities: Companies providing essential services like electricity, gas, and water supply fall into this category.
3. Tertiary Sector:
* Characteristic: The tertiary sector is also known as the service sector and involves businesses that offer various services to consumers and other businesses. The main defining characteristic of this sector is Intangibility: Services are intangible and cannot be touched or held. They are often experienced directly by consumers through interactions with service providers or through the use of technology. Secondly, High Human Involvement: The tertiary sector relies heavily on a skilled and often highly educated workforce to deliver services effectively. This can include professionals such as doctors, lawyers, teachers, and customer service representatives. Lastly, Customization: Many services are customized to meet the specific needs and preferences of individual clients or customers. This personalization is a key characteristic of the tertiary sector. For example Legal Advice will always be different depending on the specific needs of the client.
* Types of Businesses: a. Retail and Wholesale: Businesses engaged in the sale of goods to consumers or to other businesses. b. Healthcare and Education: This includes hospitals, clinics, schools, colleges, and universities. c. Financial Services: Banks, insurance companies, and investment firms are part of this sector. d. Hospitality and Tourism: Hotels, restaurants, travel agencies, and entertainment venues fall into this category. e. Professional Services: Legal, accounting, consulting, and IT services are part of the tertiary sector.
These industry sectors represent the different stages of economic activity, with the primary sector providing raw materials, the secondary sector processing and manufacturing goods, and the tertiary sector offering services and distribution. Together, these sectors form the backbone of an economy, contributing to its growth and development Tutor Notes
- I've gone overboard on naming the types of organisation in the different sectors. You don't have to remember all of these. 3 examples is sufficient to get good marks. I've just named them all so you can see what could be considered a right answer.
- Some people are talking about Quaternary and Quinary Sectors. CIPS is not one of those people, so don't worry if you come across those terms in any further reading. But FYI
1.
* Quaternary Sector: This sector involves knowledge-based activities, including research and development, information technology, and data analysis.
* Quinary Sector: The quinary sector comprises high-level decision-making and leadership roles in areas such as government, academia, healthcare, and top-level corporate management.
- LO 4.1 p.196
Question 29
Industry Sectors can be classified as Primary, Secondary and Tertiary. What is meant by an 'industry sector'?
Describe the main characteristics of and types of business you will find in these. (25 marks)
Correct Answer:
See the solution inExplanation partbelow.
Explanation:
How to approach this question
- The first question can be a simple introduction with a bit of extra detail. The main 'meat' to your essay is going to be explaining the three sectors, their characteristics and example businesses.
- Aim for three well explained characteristics as a minimum
Example essay
An industry sector refers to a broad category or grouping of businesses and economic activities that share similar characteristics and functions in the production and distribution of goods and services. These sectors are often classified into three main categories: Primary, Secondary, and Tertiary. Here are the main characteristics and types of businesses you will find in each of these industry sectors:
1.Primary Sector:
*Characteristics: The primary sector involves activities related to the extraction and production of raw materials and natural resources directly from the environment. This sector relies on nature and weather patterns: businesses in the primary sector are highly dependent on natural factors such as climate, weather, soil quality, and geographic location. These factors can significantly impact the productivity and profitability of primary sector activities. Extreme weather such as floods can severely impact this sector. Moreover there is a seasonality to this sector and many activities in the primary sector require a significant amount of manual labour, particularly in agriculture, fishing, and forestry. However, modern technology has also been integrated into some primary sector activities to increase efficiency.
*Types of Businesses: a. Agriculture: This includes farming, crop cultivation, livestock raising, and forestry. b.
Mining and Extraction. c. Fishing and Aquaculture: Forestry and Logging: Includes the harvesting of timber and related activities.
2.Secondary Sector:
*Characteristic: The secondary sector focuses on the transformation of raw materials and intermediate goods into finished products. The main characteristic of the sector is that it requires high levels of machinery and industrial techniques. There is a reliance on technology. Secondly, the secondary sector adds significant value to the products compared to their raw material form. This value addition is achieved through processing, assembly, and quality control processes. The third main characteristic is standardisation: Manufacturing processes often involve standardization of components and processes to ensure consistency and quality in the final products. Standardization helps in economies of scale.
*Types of Businesses: a. Manufacturing: This sector includes factories and plants that produce tangible goods such as automobiles, electronics, textiles, and machinery. b. Construction: Involves the building and construction of structures like buildings, bridges, and infrastructure. c. Utilities: Companies providing essential services like electricity, gas, and water supply fall into this category.
3.Tertiary Sector:
*Characteristic: The tertiary sector is also known as the service sector and involves businesses that offer various services to consumers and other businesses. The main defining characteristic of this sector is Intangibility: Services are intangible and cannot be touched or held. They are often experienced directly by consumers through interactions with service providers or through the use of technology. Secondly, High Human Involvement: The tertiary sector relies heavily on a skilled and often highly educated workforce to deliver services effectively. This can include professionals such as doctors, lawyers, teachers, and customer service representatives. Lastly, Customization: Many services are customized to meet the specific needs and preferences of individual clients or customers. This personalization is a key characteristic of the tertiary sector.
For example Legal Advice will always be different depending on the specific needs of the client.
*Types of Businesses: a. Retail and Wholesale: Businesses engaged in the sale of goods to consumers or to other businesses. b. Healthcare and Education: This includes hospitals, clinics, schools, colleges, and universities. c. Financial Services: Banks, insurance companies, and investment firms are part of this sector. d.
Hospitality and Tourism: Hotels, restaurants, travel agencies, and entertainment venues fall into this category.
e. Professional Services: Legal, accounting, consulting, and IT services are part of the tertiary sector.
These industry sectors represent the different stages of economic activity, with the primary sector providing raw materials, the secondary sector processing and manufacturinggoods, and the tertiary sector offering services and distribution. Together, these sectors form the backbone of an economy, contributing to its growth and development Tutor Notes
- I've gone overboard on naming the types of organisation in the different sectors. You don't have to remember all of these. 3 examples is sufficient to get good marks. I've just named them all so you can see what could be considered a right answer.
- Some people are talking about Quaternary and Quinary Sectors. CIPS is not one of those people, so don't worry if you come across those terms in any further reading. But FYI
1.
*Quaternary Sector: This sector involves knowledge-based activities, including research and development, information technology, and data analysis.
*Quinary Sector: The quinary sector comprises high-level decision-making and leadership roles in areas such as government, academia, healthcare, and top-level corporate management.
- LO 4.1 p.196
Explanation:
How to approach this question
- The first question can be a simple introduction with a bit of extra detail. The main 'meat' to your essay is going to be explaining the three sectors, their characteristics and example businesses.
- Aim for three well explained characteristics as a minimum
Example essay
An industry sector refers to a broad category or grouping of businesses and economic activities that share similar characteristics and functions in the production and distribution of goods and services. These sectors are often classified into three main categories: Primary, Secondary, and Tertiary. Here are the main characteristics and types of businesses you will find in each of these industry sectors:
1.Primary Sector:
*Characteristics: The primary sector involves activities related to the extraction and production of raw materials and natural resources directly from the environment. This sector relies on nature and weather patterns: businesses in the primary sector are highly dependent on natural factors such as climate, weather, soil quality, and geographic location. These factors can significantly impact the productivity and profitability of primary sector activities. Extreme weather such as floods can severely impact this sector. Moreover there is a seasonality to this sector and many activities in the primary sector require a significant amount of manual labour, particularly in agriculture, fishing, and forestry. However, modern technology has also been integrated into some primary sector activities to increase efficiency.
*Types of Businesses: a. Agriculture: This includes farming, crop cultivation, livestock raising, and forestry. b.
Mining and Extraction. c. Fishing and Aquaculture: Forestry and Logging: Includes the harvesting of timber and related activities.
2.Secondary Sector:
*Characteristic: The secondary sector focuses on the transformation of raw materials and intermediate goods into finished products. The main characteristic of the sector is that it requires high levels of machinery and industrial techniques. There is a reliance on technology. Secondly, the secondary sector adds significant value to the products compared to their raw material form. This value addition is achieved through processing, assembly, and quality control processes. The third main characteristic is standardisation: Manufacturing processes often involve standardization of components and processes to ensure consistency and quality in the final products. Standardization helps in economies of scale.
*Types of Businesses: a. Manufacturing: This sector includes factories and plants that produce tangible goods such as automobiles, electronics, textiles, and machinery. b. Construction: Involves the building and construction of structures like buildings, bridges, and infrastructure. c. Utilities: Companies providing essential services like electricity, gas, and water supply fall into this category.
3.Tertiary Sector:
*Characteristic: The tertiary sector is also known as the service sector and involves businesses that offer various services to consumers and other businesses. The main defining characteristic of this sector is Intangibility: Services are intangible and cannot be touched or held. They are often experienced directly by consumers through interactions with service providers or through the use of technology. Secondly, High Human Involvement: The tertiary sector relies heavily on a skilled and often highly educated workforce to deliver services effectively. This can include professionals such as doctors, lawyers, teachers, and customer service representatives. Lastly, Customization: Many services are customized to meet the specific needs and preferences of individual clients or customers. This personalization is a key characteristic of the tertiary sector.
For example Legal Advice will always be different depending on the specific needs of the client.
*Types of Businesses: a. Retail and Wholesale: Businesses engaged in the sale of goods to consumers or to other businesses. b. Healthcare and Education: This includes hospitals, clinics, schools, colleges, and universities. c. Financial Services: Banks, insurance companies, and investment firms are part of this sector. d.
Hospitality and Tourism: Hotels, restaurants, travel agencies, and entertainment venues fall into this category.
e. Professional Services: Legal, accounting, consulting, and IT services are part of the tertiary sector.
These industry sectors represent the different stages of economic activity, with the primary sector providing raw materials, the secondary sector processing and manufacturinggoods, and the tertiary sector offering services and distribution. Together, these sectors form the backbone of an economy, contributing to its growth and development Tutor Notes
- I've gone overboard on naming the types of organisation in the different sectors. You don't have to remember all of these. 3 examples is sufficient to get good marks. I've just named them all so you can see what could be considered a right answer.
- Some people are talking about Quaternary and Quinary Sectors. CIPS is not one of those people, so don't worry if you come across those terms in any further reading. But FYI
1.
*Quaternary Sector: This sector involves knowledge-based activities, including research and development, information technology, and data analysis.
*Quinary Sector: The quinary sector comprises high-level decision-making and leadership roles in areas such as government, academia, healthcare, and top-level corporate management.
- LO 4.1 p.196
Question 30
Describe the main characteristics of, and differences between, procuring goods, services and construction works (25 points)
Correct Answer:
See the solution in Explanation part below
Explanation:
- there are a lot of components to this question so I would take a good 5 minutes to write out some bullet points on the characteristics of each one, and on some differences. Then from your notes make this into an essay. The mark scheme isn't 100% clear on how many characteristics and differences you need to name, so try and keep an equal split between the two areas. You would probably need 2-3 characteristics of each, and 3 differences for a good score.
- Characteristics of goods: tangible, homogeneous, items tend not to perish quickly, can be stored
- Characteristics of services: intangible, heterogenous, inseparable (produced and consumed at the same time), no transfer of ownership, perish upon use (i.e. cannot be stored)
- Characteristics of construction work: project-based procurement, includes procuring both goods and services, complex procurement which has its own set of regulations (CDM2015).
- Differences between these
1) goods are not usually outsourced and services can be.
2) Complexity of the supply chain (goods and construction may have a complex supply chains, but service contracts usually only involve 2 parties).
3) Timescales - construction work has a designated timescale but procurement of goods could be a one off or long-term contract, services is usually a long-term contract.
Example Essay
Introduction:
Procurement is a multifaceted field, and understanding the nuances between procuring goods, services, and construction works is pivotal for effective management. This essay explores the main characteristics that differentiate these categories.
Tangible / Intangible:
Goods are tangible items that can be physically seen and touched. For instance, raw materials like wheat and sugar in a manufacturing organization are tangible goods. On the other hand, services are intangible-though the results can be observed, the service itself cannot be touched. An example is a cleaning contract for a factory; while the effects of the cleaning are visible, the service itself remains intangible. Construction is usually a mixture of tangible and intangible procurement; the tangible is the construction materials such as bricks and windows, and the intangible aspect is the labour to complete the project.
Heterogeneous / Homogeneous:
Goods are generally homogeneous, meaning they are always the same. For example, steel purchased for manufacturing purposes will always be the same. In contrast, services are heterogeneous, varying each time they are rendered. Customer service, for instance, is inherently different each time due to the dynamic nature of customer interactions. Construction could be either heterogeneous or homogeneous depending on the project - is it a one off unique building, or is it a large housing estate of same-build properties?
Transfer of Ownership:
When goods are procured, there is a transfer of ownership. The product becomes the property of the buyer upon delivery and payment. In contrast, services do not involve a transfer of ownership as there is no physical entity to transfer. In construction the transfer of ownership is extremely complex and varies depending on the project. Usually the buyer will retain ownership of the land throughout the project, but on some occasions the construction company may take ownership for insurance purposes.
Storable (Separable/ Inseparable):
Goods are storable, allowing for purchase on one day and use on another. For example a factory can buy in plastic to be used to manufacture toys and this is stored in inventory until the time comes to make the toys. However, services are consumed at the point of purchase, making them inseparable. The service is bought and utilized simultaneously. Services cannot be stored. This is the same for construction.
Ability to Outsource:
Goods are rarely outsourced, as they are typically purchased directly from suppliers. Services, on the other hand, can be easily outsourced-examples include outsourcing finance, cleaning, or security services. Construction works are commonly outsourced, with external companies hired to execute projects.
Complexity of the Supply Chain:
Service contracts often involve a simple two-party relationship between the buyer and the supplier. Goods and construction, however, may have complex supply chains. For example, procuring a pen involves a supply chain with various steps, including the raw material supplier, manufacturer, and possibly a wholesaler. Construction works often feature a tiered supply chain with subcontractors playing crucial roles.
Construction as a Hybrid:
Construction procurement represents a hybrid, incorporating elements of both goods and services. It involves hiring a service, such as a bricklayer for laying bricks, while also procuring the tangible goods-bricks. Separating goods from services in construction is challenging, as they are often intertwined, and both aspects are paid for simultaneously.
Conclusion:
In conclusion, distinguishing between the procurement of goods, services, and construction works is essential for effective supply chain management. The tangible or intangible nature, heterogeneity, transfer of ownership, storability, outsourcing potential, and supply chain complexities offer a comprehensive framework for understanding the unique characteristics of each category. Recognizing these distinctions empowers organizations to tailor their procurement strategies to the specific challenges and dynamics associated with goods, services, and construction works.
Tutor Notes
- What a characteristic is can also be a difference. So for example you can say tangible is a characteristic of goods but tangibility is also the main difference between goods and services. So don't worry too much about which order to write stuff in, or doing clear sections for this type of essay. It all comes out in the wash.
- Other differences in procuring these include:
- Costs: procuring goods such as stationary for an office will be low-cost so may not require approval, but a service contract may require management sign off. Procuring construction projects tend to be huge sums of money
- Where the budget comes from: goods and services may be operational expenditure and construction works capital expenditure.
- The level of risk involved in the procurement: goods tends to be quite low risk and construction high risk.
- Types of contract involved: procuring goods may be very simple and just require a PO, services is more complex so may require a formal contract or Deed of Appointment. Construction projects will require a contract due to the high value and high risk of the purchase
- Legislation - Goods = Sale of Goods Act, Construction - CDM Regulations 2015. Construction is much more heavily regulated than services or goods. Note CDM regulations isn't part of CIPS. It's occasionally referenced in various modules but you don't have to really know what it is. Just know it's the main legislation governing the construction industry. Construction - Construction Design and Management Regulations 2015 (hse.gov.uk)
- Study guide LO 1.3.1 p. 40, but mainly p. 52 for services. NOTE the title of this learning outcome includes construction and it is hardly mentioned in the study guide. Most of the above information on construction comes from my own knowledge rather than the book.
Explanation:
- there are a lot of components to this question so I would take a good 5 minutes to write out some bullet points on the characteristics of each one, and on some differences. Then from your notes make this into an essay. The mark scheme isn't 100% clear on how many characteristics and differences you need to name, so try and keep an equal split between the two areas. You would probably need 2-3 characteristics of each, and 3 differences for a good score.
- Characteristics of goods: tangible, homogeneous, items tend not to perish quickly, can be stored
- Characteristics of services: intangible, heterogenous, inseparable (produced and consumed at the same time), no transfer of ownership, perish upon use (i.e. cannot be stored)
- Characteristics of construction work: project-based procurement, includes procuring both goods and services, complex procurement which has its own set of regulations (CDM2015).
- Differences between these
1) goods are not usually outsourced and services can be.
2) Complexity of the supply chain (goods and construction may have a complex supply chains, but service contracts usually only involve 2 parties).
3) Timescales - construction work has a designated timescale but procurement of goods could be a one off or long-term contract, services is usually a long-term contract.
Example Essay
Introduction:
Procurement is a multifaceted field, and understanding the nuances between procuring goods, services, and construction works is pivotal for effective management. This essay explores the main characteristics that differentiate these categories.
Tangible / Intangible:
Goods are tangible items that can be physically seen and touched. For instance, raw materials like wheat and sugar in a manufacturing organization are tangible goods. On the other hand, services are intangible-though the results can be observed, the service itself cannot be touched. An example is a cleaning contract for a factory; while the effects of the cleaning are visible, the service itself remains intangible. Construction is usually a mixture of tangible and intangible procurement; the tangible is the construction materials such as bricks and windows, and the intangible aspect is the labour to complete the project.
Heterogeneous / Homogeneous:
Goods are generally homogeneous, meaning they are always the same. For example, steel purchased for manufacturing purposes will always be the same. In contrast, services are heterogeneous, varying each time they are rendered. Customer service, for instance, is inherently different each time due to the dynamic nature of customer interactions. Construction could be either heterogeneous or homogeneous depending on the project - is it a one off unique building, or is it a large housing estate of same-build properties?
Transfer of Ownership:
When goods are procured, there is a transfer of ownership. The product becomes the property of the buyer upon delivery and payment. In contrast, services do not involve a transfer of ownership as there is no physical entity to transfer. In construction the transfer of ownership is extremely complex and varies depending on the project. Usually the buyer will retain ownership of the land throughout the project, but on some occasions the construction company may take ownership for insurance purposes.
Storable (Separable/ Inseparable):
Goods are storable, allowing for purchase on one day and use on another. For example a factory can buy in plastic to be used to manufacture toys and this is stored in inventory until the time comes to make the toys. However, services are consumed at the point of purchase, making them inseparable. The service is bought and utilized simultaneously. Services cannot be stored. This is the same for construction.
Ability to Outsource:
Goods are rarely outsourced, as they are typically purchased directly from suppliers. Services, on the other hand, can be easily outsourced-examples include outsourcing finance, cleaning, or security services. Construction works are commonly outsourced, with external companies hired to execute projects.
Complexity of the Supply Chain:
Service contracts often involve a simple two-party relationship between the buyer and the supplier. Goods and construction, however, may have complex supply chains. For example, procuring a pen involves a supply chain with various steps, including the raw material supplier, manufacturer, and possibly a wholesaler. Construction works often feature a tiered supply chain with subcontractors playing crucial roles.
Construction as a Hybrid:
Construction procurement represents a hybrid, incorporating elements of both goods and services. It involves hiring a service, such as a bricklayer for laying bricks, while also procuring the tangible goods-bricks. Separating goods from services in construction is challenging, as they are often intertwined, and both aspects are paid for simultaneously.
Conclusion:
In conclusion, distinguishing between the procurement of goods, services, and construction works is essential for effective supply chain management. The tangible or intangible nature, heterogeneity, transfer of ownership, storability, outsourcing potential, and supply chain complexities offer a comprehensive framework for understanding the unique characteristics of each category. Recognizing these distinctions empowers organizations to tailor their procurement strategies to the specific challenges and dynamics associated with goods, services, and construction works.
Tutor Notes
- What a characteristic is can also be a difference. So for example you can say tangible is a characteristic of goods but tangibility is also the main difference between goods and services. So don't worry too much about which order to write stuff in, or doing clear sections for this type of essay. It all comes out in the wash.
- Other differences in procuring these include:
- Costs: procuring goods such as stationary for an office will be low-cost so may not require approval, but a service contract may require management sign off. Procuring construction projects tend to be huge sums of money
- Where the budget comes from: goods and services may be operational expenditure and construction works capital expenditure.
- The level of risk involved in the procurement: goods tends to be quite low risk and construction high risk.
- Types of contract involved: procuring goods may be very simple and just require a PO, services is more complex so may require a formal contract or Deed of Appointment. Construction projects will require a contract due to the high value and high risk of the purchase
- Legislation - Goods = Sale of Goods Act, Construction - CDM Regulations 2015. Construction is much more heavily regulated than services or goods. Note CDM regulations isn't part of CIPS. It's occasionally referenced in various modules but you don't have to really know what it is. Just know it's the main legislation governing the construction industry. Construction - Construction Design and Management Regulations 2015 (hse.gov.uk)
- Study guide LO 1.3.1 p. 40, but mainly p. 52 for services. NOTE the title of this learning outcome includes construction and it is hardly mentioned in the study guide. Most of the above information on construction comes from my own knowledge rather than the book.