Refer to the exhibit.

An engineer configured NAT translations and has verified that the configuration is correct.
Which IP address is the source IP?

• A.10.4.4.5
• B.172.23.103.10
• C.172.23.104.4
• D.10.4.4.4

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address
10.20.20.1/24?

• A.R1(config)#interface ethernet0/0
  R1(config)#ip address 10.20.20.1 255.255.255.0
• B.R1(config)#interface ethernet0/0.20
  R1(config)#ip address 10.20.20.1 255.255.255.0
• C.R1(config)#interface ethernet0/0.20
  R1(config)#encapsulation dot1q 20
  R1(config)#ip address 10.20.20.1 255.255.255.0
• D.R1(config)#interface ethernet0/0
  R1(config)#encapsulation dot1q 20
  R1(config)#ip address 10.20.20.1 255.255.255.0

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

A network administrator must permit SSH access to remotely manage routers in a network. The operations team resides on the 10.20.1.0/25 network. Which command will accomplish this task?

• A.access-list 2699 permit udp 10.20.1.0 0.0.0.255
• B.no access-list 2699 deny tcp any 10.20.1.0 0.0.0.127 eq 22
• C.access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
• D.no access-list 2699 deny ip any 10.20.1.0 0.0.0.255

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

Router R1 Fa0/0 cannot ping router R3 Fa0/1.
Which action must be taken in router R1 to help resolve the configuration issue?

• A.configure a static route with Fa0/1 as the egress interface to reach the 20.20.20.0/24 network
• B.configure a static route with 10.10.10.2 as the next hop to reach the 20.20.20.0/24 network
• C.set the default gateway as 20.20.20.2
• D.set the default network as 20.20.20.0/24

Comment: *

Name: *

Email: *

Verification: *

Refer to Exhibit.

How does SW2 interact with other switches in this VTP domain?

• A.It processes VTP updates from any VTP clients on the network on its access ports.
• B.It receives updates from all VTP servers and forwards all locally configured VLANs out all trunk ports
• C.It forwards only the VTP advertisements that it receives on its trunk ports.
• D.It transmits and processes VTP updates from any VTP Clients on the network on its trunk ports

Comment: *

Name: *

Email: *

Verification: *