A wireless engineer is rolling out a group of new Meraki APs across multiple office floors. The APs must be centrally managed through the Meraki dashboard and be set up for automatic cloud registration. Network connectivity has been established, and the company firewall follows standard security policies. To minimize manual configuration for each AP the engineer must configure them to automatically discover the dashboard. Which action must the engineer take?

• A.Set up a site-to-site VPN between the switch on each floor and the data center.
• B.Assign a static management IP to each AP using the local status page.
• C.Register the AP serial numbers in the lease table of the DHCP server.
• D.Connect APs to a network with internet and allow outbound access to Meraki cloud.

Comment: *

Name: *

Email: *

Verification: *

To double the range of a transmitter, which value must the transmitter be changed to if it is currently at 17 dBm?

• A.20 dBm
• B.27 dBm
• C.100 dBm
• D.17 dBm

Comment: *

Name: *

Email: *

Verification: *

What is used for measuring gain on a Wi-Fi antenna?

• A.length of the antenna
• B.decibels relative to dBi
• C.voltage against dBm
• D.blend of analog and digital signals

Comment: *

Name: *

Email: *

Verification: *

An onsite engineer is working to connect devices to the wireless network using central switching in a corporate environment. Security protocols and network-specific settings must be configured as per enterprise policy. After the initial wireless settings are applied on an iOS tablet, the engineer must ensure that VLAN ID 10 is assigned on the client device to complete a successful enterprise Wi-Fi connection. Which action meets this requirement?

• A.Disable VLAN tagging on the WLAN and configure the APs switch port as an access port on VLAN 10 to assign the VLAN to the client device.
• B.Manually set VLAN ID 10 on the iOS tablets Wi-Fi settings to ensure VLAN 10 is allowed through the APs switch port.
• C.Configure the policy profile to use VLAN 10, and ensure the WLAN profile is mapped to it.
• D.Configure the AP to assign VLAN ID 1 by default and rely on the switch to redirect traffic to VLAN
  10 based on MAC address filtering.

Comment: *

Name: *

Email: *

Verification: *

How does enabling webhook notifications enhance Cisco Meraki Wireless integration?

• A.lightweight way to subscribe to alerts
• B.predictable device discovery timing
• C.isolated notification delivery
• D.periodic manual firmware installations

Comment: *

Name: *

Email: *

Verification: *