To reduce costs and increase mobility, a Chief Technology Officer (CTO) wants to adopt cloud services for the organization and its affiliates. To reduce the impact for users, the CTO wants key services to run from the on-site data center and enterprise services to run in the cloud. Which of the following deployment models is the best choice for the organization?
Correct Answer: C
Explanation: (Only visible for DumpsDB members)
Question 2
A junior network administrator is auditing the company network and notices incrementing input errors on a long-range microwave interface. Which of the following is the most likely reason for the errors?
Correct Answer: C
Explanation: (Only visible for DumpsDB members)
Question 3
SIMULATION Users are unable to access files on their department share located on file server 2. The network administrator has been tasked with validating routing between networks hosting workstation A and file server 2. INSTRUCTIONS Click on each router to review output, identify any issues, and configure the appropriate solution. If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Correct Answer:
See the solution below in Explanation Explanation: To validate routing between networks hosting Workstation A and File Server 2, follow these steps: Review Routing Tables: Check the routing tables of Router A, Router B, and Router C to identify any missing routes. Identify Missing Routes: Ensure that each router has routes to the networks on which Workstation A and File Server 2 are located. Add Static Routes: If a route is missing, add a static route to the relevant destination network via the correct interface. Routing Table: Gateway of last resort is 0.0.0.0 to network 0.0.0.0 S* 0.0.0.0/0 is directly connected, GigabitEthernet3 10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks C 10.0.4.0/22 is directly connected, GigabitEthernet2 C 10.0.6.0/24 is directly connected, GigabitEthernet2 L 10.0.6.1/32 is directly connected, GigabitEthernet2 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks C 172.16.27.0/30 is directly connected, GigabitEthernet3 L 172.16.27.1/32 is directly connected, GigabitEthernet3 Routing Table: Gateway of last resort is 0.0.0.0 to network 0.0.0.0 S* 0.0.0.0/0 is directly connected, GigabitEthernet1 10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks C 10.0.0.0/22 is directly connected, GigabitEthernet1 L 10.0.0.1/32 is directly connected, GigabitEthernet1 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks C 172.16.27.4/30 is directly connected, GigabitEthernet1 L 172.16.27.5/32 is directly connected, GigabitEthernet1 Routing Table: 10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks S 10.0.0.0/22 [1/0] via GigabitEthernet1 S 10.0.4.0/22 [1/0] via GigabitEthernet2 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks C 172.16.27.0/30 is directly connected, GigabitEthernet2 L 172.16.27.2/32 is directly connected, GigabitEthernet2 C 172.16.27.4/30 is directly connected, GigabitEthernet1 L 172.16.27.6/32 is directly connected, GigabitEthernet1 Install Static Route to 10.0.0.0/22 via 172.16.27.1 (assuming Router C's IP is 172.16.27.1): Destination Prefix: 10.0.0.0 Destination Prefix Mask: 255.255.252.0 Interface: GigabitEthernet3 Install Static Route to 10.0.4.0/22 via 172.16.27.5 (assuming Router C's IP is 172.16.27.5): Destination Prefix: 10.0.4.0 Destination Prefix Mask: 255.255.252.0 Interface: GigabitEthernet1 Install Static Route to 10.0.6.0/24 via 172.16.27.2 (assuming Router A's IP is 172.16.27.2): Destination Prefix: 10.0.6.0 Destination Prefix Mask: 255.255.255.0 Interface: GigabitEthernet2 Install Static Route to 10.0.0.0/22 via 172.16.27.1 (assuming Router B's IP is 172.16.27.1): Destination Prefix: 10.0.0.0 Destination Prefix Mask: 255.255.252.0 Interface: GigabitEthernet1 Summary of Static Routes: Router A: ip route 10.0.0.0 255.255.252.0 GigabitEthernet3 Router B: ip route 10.0.4.0 255.255.252.0 GigabitEthernet1 Router C: ip route 10.0.6.0 255.255.255.0 GigabitEthernet2 ip route 10.0.0.0 255.255.252.0 GigabitEthernet1 These configurations ensure that each router knows the correct paths to reach Workstation A and File Server 2, resolving the connectivity issue.
Question 4
Which of the following does a full-tunnel VPN provide?
Correct Answer: A
Explanation: (Only visible for DumpsDB members)
Question 5
A network engineer runs ipconfig and notices that the default gateway is 0.0.0.0. Which of the following address types is in use?
