Free Dell DCAN-100 Exam Dumps Questions & Answers


Exam Code/Number:	DCAN-100Join the discussion
Exam Name:	Dell Networking Associate Exam
Certification:	Dell
Free Question Number:	62
Publish Date:	Aug 18, 2026
# of views:	2874
Rating 100%

Page: 1 / 13
Total 62 questions

Question 1

Refer to the exhibit. A technician is troubleshooting IP connectivity between two servers connected to the same N3024 switch.
Server 1 is configured with a gateway of 192.168.1.1 and can ping its gateway Server 2 is configured with gateway of 192.168.2.1 and can ping its gateway Both servers are pingable by the N3024 The servers cannot ping each other What is causing this issue?

A.Server subnets overlap but are in different VLANs
B.Server firewall is not allowing ICMP traffic to be passed
C.Network MTU needs to be increased
D."ip routing" is disabled on the N3024

Question 2

Refer to the exhibit.

A technician configures RIP on a new N-Series switch to connect to an existing switch that runs RIP. The new switch routing table is NOT populating even after the correct network statements are added.
What is causing this issue?

A.The new N-Series switch does not have "default-information originate" configured.
B.The existing switch is configured to send and receive only for RIPv1.
C.The other switch is a root bridge and cannot form RIP relationships.
D.The existing switch has been configured for "hostroutesaccept".

Question 3

A technician is applying a switch configuration to an N-Series switch to provide Internet access to all connected subnets. The technician has connected a computer and assigned it an IP address, subnet mask, DNS, and gateway address. The technician is unable to browse the Internet from that computer.
What is causing the issue?

A.Spanning Tree blocked the port going to the PC.
B.DHCP Snooping has blocked the host.
C.The "ip helper-address" command is configured on the switch.
D.The static routes in the configuration file are incorrect.

Question 4

A technician implements a new copper connection to Gi2/0/20.
Which command should be used to check the cable length?

A.test copper-length tdr gigabitethernet 2/0/20
B.test copper-port tdr gigabitethernet 2/0/20
C.test tdr copper-length gigabitethernet 2/0/20
D.test tdr copper-port gigabitethernet 2/0/20

Question 5

Which two subnet masks should be used to achieve a network increment of 4?

A./28255.255.255.252
B./29255.255.255.254
C./30255.255.255.254
D./30 255.255.255.252