Free Dell DSDSC-200 Exam Dumps Questions & Answers

During failover testing, an engineer finds that the iSCSI connection failed over properly when a physical link was disconnected. The FC connection did NOT failover when a physical link was disconnected.
Which configuration is causing this issue?

• A.iSCSI is in legacy port mode, andFC is in virtual port mode.
• B.iSCSI is in virtual port mode, and FC is in legacy port mode.
• C.iSCSI is in legacy port mode, and FC is in legacy port mode.
• D.iSCSI is in virtual port mode, and FC is in virtual port mode.

An engineer has installed a system as follows:
Tier 1: WI SSD drives
Tier 2: RI SSD drives
Tier 3: 7K drives
All volumes are set to use the recommended storage profile.
What is the purpose of a Space Management Replay in the SC?

• A.to maintain space avaliability in T1 for new writes.
• B.to make sure that a volume does NOT consume more space than it is allowed.
• C.to allow Data Progression to move inaccessible data from Tier 1 to the lowest tier available.
• D.to allow On Demand Data Progression to convert R10 data to R5 in Tier 1.

When testing controller failover the customer notices that the IOMeter running on the server paused, then continued running IO without reporting an error. The customer expresses concern to the deployment engineer.
How should the engineer respond to the customer?

• A.This is normal behavior because the system has to move WWNs to different ports.
• B.This is normal behavior because only one server path used when a controller fails.
• C.The Fibre Channel (FC) switch zoning is configured incorrectly.
• D.The server multi-pathing software is configured incorrectly.

A deployment technician has cabled several enclosures on one chain: (1) SC200, (1)
SC220, and (1) SC 280. When the deployment technician tries to configure the Disk folder, some disks are missing.
What is the cause of this problem?

• A.A SC200 must be on a separate chain from the SC220 and SC280.
• B.The SC280 must be on a separate chain from the SC200 and SC220.
• C.The SC220 must be on a separate chain from the SC200 and SC280.
• D.There are too many disks on the same chain.

Refer to the exhibit.

A pagepool has 7.3 TB of allocated space; 4.2 TB of that space is being used by volumes.
Tier 3 RAID 6-6 Standard is currently 76% utilized. What happens when Tier 3 RAID 6-6 Standard becomes 100% utilized?

• A.Data progression no longer moves data into this pagepool class.
• B.Performance is degraded for volumes with active data m this pagepool class
• C.Data progression moves data from this pagepool class into another class.
• D.The system allocates more raw space for use by this pagepool class.