Free EMC D-RP-DY-A-24 Exam Dumps Questions & Answers

A company is deploying a physical RPA cluster to protect a Unity array. Which requirement must be verified prior to running the Deployment Manager, RecoverPoint with Unity Installer wizard?

• A.RPA FC ports are not zoned to the Unity synchronous replication ports
• B.CHAP secrets are configured for the Unity iSCSI ports
• C.RecoverPoint with VNX(SE) license is installed on the Unity system
• D.Unity RecoverPoint write splitter is enabled

What is the maximum number of arrays, per cluster, supported with a RecoverPoint/EX license?

• A.2
• B.1
• C.Unlimited
• D.3

During the write phase of RecoverPoint replication, when does the RPA send an acknowledgement back to the write splitter?

• A.After the local RPA has received an acknowledgement from the remote RPA
• B.After the distribution phase has completed
• C.As soon as the RPA receives the write
• D.After the RPA has received an acknowledgement from all copies involved with replication

An organization plans to connect three different sites over IP using a RecoverPoint cluster at each site. However, the cluster fails to connect. The network team has determined that the required IP routing and WAN connectivity is in place. The desired routing information is added while running the Deployment Manager wizard.
What is a possible cause for the failure?

• A.MTU size is to be set to 9000
• B.Secondary sites are on different network subnets
• C.boxmgmt password is different at the secondary sites
• D.Jumbo frames are not enabled on the IP network

A storage administrator has seen high-load events in their RecoverPoint environment. The administrator wants to review the performance data for the past week with RecoverPoint. In addition, the administrator wants the raw data saved to a spreadsheet to review and create graphs of system performance over a period of time.
Which CLI command should be used?

• A.get_rpa_statistics
• B.balance_load
• C.detect_bottlenecks
• D.export_statistics