Instant Access EMC.D-VXR-OE-23.Premium.Version Actual Practice Test Engine for Free

Question 1

SIMULATION
After the initial setup, a customer requested the administrator use active-active teaming and failover order for the vSAN and vMotion port groups. The customer currently has two uplinks and one distributed switch. Without accessing any hosts, use the simulator to remediate the configuration.

Correct Answer:

See the step by step solution in the Explanation below
Explanation:
To configure active-active teaming and set the failover order for the vSAN and vMotion port groups on a distributed switch using the vSphere Client, follow these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Navigate to Networking:
From the home screen, click on Networking in the left-hand navigation pane.
Select the Distributed Switch:
Locate and select the distributed switch that the vSAN and vMotion port groups are using.
Edit vSAN Port Group Settings:
Right-click on the vSAN port group and select Edit Settings.
In the Edit Settings window, click on Teaming and Failover.
Configure Active-Active Teaming for vSAN:
In the Teaming and Failover section, you will see the list of uplinks.
Ensure that both uplinks are set as Active Uplinks.
To do this, drag the uplinks from the Unused Uplinks or Standby Uplinks section to the Active Uplinks section if necessary.
Ensure that no uplinks are in the Standby Uplinks section (all should be in Active Uplinks).
Set Failover Order for vSAN:
Ensure the failover order is correctly set to use both uplinks for active-active teaming.
Click OK to save the changes.
Edit vMotion Port Group Settings:
Right-click on the vMotion port group and select Edit Settings.
In the Edit Settings window, click on Teaming and Failover.
Configure Active-Active Teaming for vMotion:
In the Teaming and Failover section, ensure that both uplinks are set as Active Uplinks.
Drag the uplinks from the Unused Uplinks or Standby Uplinks section to the Active Uplinks section if necessary.
Ensure that no uplinks are in the Standby Uplinks section (all should be in Active Uplinks).
Set Failover Order for vMotion:
Ensure the failover order is correctly set to use both uplinks for active-active teaming.
Click OK to save the changes.
Verify Configuration:
Check the Networking section to verify that the changes have been applied correctly and that both port groups are using active-active teaming with the appropriate failover order.
Reference:
VMware vSphere Networking Guide: vSphere Networking
These steps outline the process to configure active-active teaming and set the failover order for the vSAN and vMotion port groups without accessing any hosts directly. This ensures redundancy and efficient use of available network resources.

Question 2

An environment has two VxRail clusters In vCenter there is only one vSphere Distributed Switch object for both clusters Which deployment architecture was used for these clusters?

A.External vCenter Server with internal DNS
B.Internal vCenter Server with internal DNS
C.Internal vCenter Server with external DNS
D.External vCenter Server with external DNS

Question 3

SIMULATION
An existing 4-node VxRail standard cluster has to be scaled out with 2 additional nodes and configured as a stretched cluster. An administrator must prepare a vSAN storage policy that should have the following:
- vSAN Policy Name: vSAN
Stretched Cluster
- Data protection across the sites
- Local protection: RAID-1 with
FTT=1
- Thick Provisioning
An administrator should be able to provision a VM even if the currently available cluster resources cannot satisfy the current policy.
Use the simulator to create the required vSAN storage policy.

Question 4

Which VxRail networks support link aggregation1?

A.vMotion and VxRail Management
B.VxRail Management and vSAN
C.Private Management and VxRail Management
D.vSAN and vMotion

Question 5

A VM is configured with hard disks totaling 100 GB allocated The VM is using a RAID 5 vSAN Storage Policy What is the total space that is consumed on the vSAN Datastore?

A.133 GB
B.100 GB
C.200 GB
D.166 GB


Exam Code/Number:	D-VXR-OE-23Join the discussion
Exam Name:	Dell VxRail Operate 2023
Certification:	EMC
Free Question Number:	49
Publish Date:	Aug 30, 2026
# of views:	2244
Rating 100%

Free EMC D-VXR-OE-23 Exam Dumps Questions & Answers

Question 1

Question 2

Question 3

Question 4

Question 5

Add Comments

Download PDF File