An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment.
What must the LTM Specialist consider before implementing the configuration change?

• A.Impact on system performance that might be noticeable
• B.The add-on license that is required for this feature to be available
• C.Creating the required separate interface for connection mirroring
• D.Decreased number of possible concurrent connections to that virtual server

Comment: *

Name: *

Email: *

Verification: *

Exhibit.

The three VLANS shown provide connectivity to backend servers. The backend servers are being moved to unmanaged switches and require separate interfaces.
How should the F5 device interfaces be configured?

• A.Create VLAN named VLAN_A enter 100 under Tag and move interface 1.1 to tagged Create VLAN_B enter 200 and move interface 1.2 to tagged Create VLAN_C Center 300 and move interface 1.3 to tagged.
• B.Create VLAN_A move interface 1.1 to untagged. Create VLAN_B move interface 1.2 to untagged. Create VLAN_C move interface 1.3 to untagged.
• C.Create a Trunk interface and combined interface 1.1.1.2 and 1.3.
• D.Create a Trunk interface and select VLAN_A, VLAN_B. and VLAN_C.

Comment: *

Name: *

Email: *

Verification: *

An LTM Specialist needs to force only FTP traffic, sourced from subnet 10.10.10.0/24 to virtual server 10.10.20.1 to the new FTP1 server. The following virtual servers are configured on the LTM device:
Traffic sourced from 10.10.10/24 must use the specific pool member for load balancing.
Which configuration change is needed to meet the requirements?

• A.Create a new virtual server for traffic sourced from 10.10.10.0/24 on port 80 that is destined to 10.10.20.1/32, and create a new pool has only the pool member FTP1 defined.
• B.Add FTP1 to the pool assigned to the MyVS4 virtual server, and remove all other pool members from the pool.
• C.Create a new virtual server for traffic sourced from 10.10.10.0/24 on traffic sourced from 10.10.10./24 on port 21 that is destined to 10.10.20.1/32, and create a new pool that has only the pool member FTP1 defined.
• D.Add FTP1 to the pool assigned to the MyVS2 virtual server, and remove all other pool member from the pool.

Comment: *

Name: *

Email: *

Verification: *

An LTM Specialist has noticed in the audit log that there are numerous attempts to log into the Admin account. Theses attempts are sourced from a suspicious IP address range to the Configuration Utility of the LTM device.
How should the LTM Specialist block these attempts?

• A.add the permitted source IP addresses to the allow list via Configuration Utility
• B.add the suspicious source IP addresses to the httpd deny list via tmsh
• C.add the suspicious source IP addresses to the httpd deny list via Configuration Utility
• D.add the permitted source IP addresses to the httpd allow list via tmsh

Comment: *

Name: *

Email: *

Verification: *

AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client's IP address must be included in the traffic sent to the pool member.
What is a complete set of profiles that must be configured for the virtual server to meet these requirements?

• A.TCP, Client SSL, Server SSL
• B.TCP , Server SSL, HTTP
• C.TCP, Client SSL, HTTP
• D.TCP, Client SSL, Server SSL, HTTP

Comment: *

Name: *

Email: *

Verification: *