Free HP HP2-H27 Exam Dumps Questions & Answers

You have configured the SATA RAID controller to IDE Emulation mode to perform hard disk self-tests.
What happens if you forget to configure the controller back to RAID mode before loading the operating system?

• A.The BIOS detects existing RAID bytes on the hard drives and sends an error code and a message to place the drives back into array mode.
• B.The BIOS detects existing RAID bytes on the hard drives and automatically switches the controller back to ACHI/RAID mode.
• C.If the system is configured for RAID 5. it starts up normally, but it recognizes other drives only as logical drives requiring reconfiguration of the RAID.
• D.The system tries to load the wrong storage driver causing permanent damage and possible data loss.

Which services does HP handle (rather than the service provider) for WWAN module issues? (Select two)

• A.Billing issues
• B.Network issues
• C.Account settings configuration
• D.Hardware configuration
• E.Initial hardware setup

Which disclosure level is specified in EF0012J according to the support communication code for indicating audiences?

• A.The E is for external partners specifying that this communication is restricted from the general public and end users but is available to all external HP partners.
• B.E is for everyone specifying that this communication is available to the general public and end users.
• C.E is for engineering specifying that this communication is HP confidential and limited to HP (badged) employees.
• D.E is for enterprise specifying that this communication is available to enterprise-level customers (major accounts), enterprise-level service providers, HP employees, and channel partners.

What is different about USB 3.0 ports that allows USB 3.0 devices to communicate at higher speeds?

• A.USB 3.0 implements packet compression for fast data transfer
• B.USB 3.0 receptacles and plugs have twice as many contacts
• C.USB 3.0 provides and accepts greater voltage increasing overall performance
• D.USB 3.0 provides parallel processing techniques for optimal speeds.

Why is an antistatic mat important for controlling electrostatic discharge? (Select two.)

• A.provides a soft surface to prevent scratches on the case or outer shell of the computer.
• B.provides electrostatic protection for sensitive equipment without requiring the mat to be connected to a ground.
• C.provides a surface that gradually bleeds electrical energy instead of collapsing to real ground potential.
• D.drains power quickly with a surface that provides real ground potential with a very low electrical impedance.
• E.provides a dissipative connection for a wrist strap that must be worn by the service technician.