A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment.
Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?

• A.It will enhance iLO security by leveraging the key stored in the silicon root of trust.
• B.It will enable two-factor authentication when users log on to iLO.
• C.It will enable Zero Sign In to log in to iLO without entering a user name and password.
• D.It will allow the servers' iLO to detect compromised firmware code.

Comment: *

Name: *

Email: *

Verification: *

You are troubleshooting an HPE ProLiant rack-mount server. You need to run diagnostic tests on local storage.
Which HPE tool should you use?

• A.Intelligent Management Center
• B.iLO
• C.OneView
• D.Smart Storage Administrator

Comment: *

Name: *

Email: *

Verification: *

You are installing a rack at customer site.
How can you ensure redundant power to the rack?

• A.Connect an uninterruptible power supply (UPS) to redundant circuit breakers at the facility power source.
• B.Install two power distribution units (PDUs) with each one connected to a power socket supplied by an independent electrical power source.
• C.Use two different power cords to connect the server to the power grid at the customer site.
• D.Ensure 3-phase power is available in the data center.

Comment: *

Name: *

Email: *

Verification: *

A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?

• A.One VSX stack of two Aruba 8325 48-port 1/10GBASE-X SFP+ switches with the following:
  * 14 10GBASE-T transceivers in each switch
  * 10 SFP+ to SFP+ DACs in each switch
• B.One IRF stack of two HPE 5945 48-port 1/10GBASE-X SFP+ switches with the following:
  * 14 10GBASE-T transceivers in each switch
  * 10 SFP+ to SFP+ DACs in each switch
• C.One VSX stack of two Aruba 8320 48-port 1/10GBASE-X SFP+ switches with the following:
  * 14 10GBASE-T transceivers in each switch
  * 10 SFP+ to SFP+ DACs in each switch
  * Two QSFP+ to Quad SFP+ adapters
• D.One IRF stack of wo HPE 5945 2-Slot switches each with the following:
  * One 24-Port SFP28 + 2-Port QSFP28 module
  * One 24-Port 1/10GBASE-T + 2-Port QSFP+ module
  * 10 SFP+ to SFP+ DACs in each switch

Comment: *

Name: *

Email: *

Verification: *

A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?

• A.Configure a scope to include the listener.
• B.Configure SNMP Trap Forwarding.
• C.Configure scheduled reports to export the data to the listener.
• D.Configure the listener as a managed device.

Comment: *

Name: *

Email: *

Verification: *