Examine the attached diagram

Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?

• A.Server 2 can successfully access the core layer via the keepalive link.
• B.Server 2 cannot access the core layer.
• C.Server 1 can access the core layer via both uplinks.
• D.Server 1 and Server 2 can communicate with each other via the core layer.

Comment: *

Name: *

Email: *

Verification: *

Examine the network topology.

The network is configured for OSPF with the following attributes:
Here is the OSPF configuration performed on Core1:

Based on the above information, what is correct?

• A.ISP 1 is not reachable from any area.
• B.Area 1 has 23 routes
• C.Area 0 has 81 routes
• D.Corel has received one type 5 LSA from the ASBR.

Comment: *

Name: *

Email: *

Verification: *

Examine the following AOS-CX switch configuration:

Which statement correctly describes what is allowed for traffic entering interface 1/1/3?

• A.IP traffic from 10.1.11.0/24 is allowed to access 10.1.110.0/24
• B.Traffic from 10.0.12.0/24 will generate a log record when accessing 10.0.11.0/24
• C.IP traffic from 10.0.11.0/24 is allowed to access 10.1.12.0/24
• D.IP traffic from 10.1.12.0/24 is allowed to access 172.0.1.0/23

Comment: *

Name: *

Email: *

Verification: *

Examine the AOS-CS switch output:

Based on this output, what is correct?

• A.Only 802.1X authentication is configured on the port
• B.802.1X authentication was successful, but MAC authentication is yet to start
• C.802.1X authentication occurred and downloadable user roles are deployed
• D.A local user role was deployed using a ClearPass solution

Comment: *

Name: *

Email: *

Verification: *

A company is implementing a new wireless design and needs it to support high availability, even during times of switch system upgrades. The solution will involve Aruba Mobility Controller (MC) and Aruba AP connections requiring POE. Which campus AOS-CX switch solution and virtual switching should the company implement at the campus access layer?

• A.AOS-CX 6400 and VSX
• B.AOS-CX 8400 and VSX
• C.AOS-CX 8325 and VSF
• D.AOS-CX 6300 and VSF

Comment: *

Name: *

Email: *

Verification: *