A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?

• A.Ensure the engineer's PC is synchronized to the same NTP server as the AOS-CX switch
• B.Ensure the engineer's web browser is configured for the same timezone as the AOS-CX switch
• C.Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server
• D.Enable trust settings for the AOS-CX switch's SSL certificate

Comment: *

Name: *

Email: *

Verification: *

A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?

• A.Implement replay protection for AAA messages
• B.Define the account to implement downloadable user roles
• C.Speed up the AAA authentication process
• D.Define the account to implement change of authorization

Comment: *

Name: *

Email: *

Verification: *

Which option correctly defines how to identify a VLAN as a voice VLAN on an AOS-CX switch?

• A.Switch(config)# vlan <VLAN-ID>
  Switch(config-vlan-<VLAN-ID>)# voice
• B.Switch(config)# vlan <VLAN-ID> voice
• C.Switch(config)# port-access lldp-group <LLDP-group-name>
  Switch(config-lldp-group)# vlan <VLAN-ID>
• D.Switch(config)# port-access role <role-name>
  Switch(config-pa-role)# vlan access <VLAN-ID>

Comment: *

Name: *

Email: *

Verification: *

Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?

• A.The default next-hop address supersedes the two preceding next-hop addresses
• B.The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable
• C.The traffic is always dropped is the next-hop addresses are unreachable
• D.The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2

Comment: *

Name: *

Email: *

Verification: *

The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:

Based on the above information, what is correct?

• A.Core1 has no OSPF routes
• B.Area 0 has 13 routes
• C.Core1 has received one LSA Type 5 from the ASBR
• D.Area 1 has 23 routes

Comment: *

Name: *

Email: *

Verification: *