What are the following characteristics of the default VLAN in a Layer 2 Ethernet switch? (multiple choice)

• A.The IP address configured on the switch will only be applied to the member port of the default VLAN.
• B.You must create a default VLAN before you can assign a port to it.
• C.By default, the switch is a member port of the default VLAN.
• D.The default VLAN cannot be manually deleted

Comment: *

Name: *

Email: *

Verification: *

Which of the following SNMP protocols supports encryption?

• A.SNMPv2
• B.SNMPv3
• C.SNMPv2c
• D.SNMPv1

Comment: *

Name: *

Email: *

Verification: *

Which port of the following switches is blocked as shown in the following figure?

• A.GO/0/1 of SWC
• B.GO/0/3 of SWA
• C.GO/0/3 of SWB
• D.GO/0/2 of SWC

Comment: *

Name: *

Email: *

Verification: *

PPP protocol field in the frame information field that indicates the type of protocol used, following which a value used to represent the information domain is an LCP packet data

• A.0x0021
• B.0x8021
• C.0x8863
• D.0xc021

Comment: *

Name: *

Email: *

Verification: *

If Host B also configured the IP address as "192.168.1.1/24", an IP address config will occur.
What will happen as a result?

• A.Host B will send an ICMP request to the destination with the configured IP address. If a reply is received, the host will notify of an address conflict.
• B.Host A will send a gratuitous ARP request to resolve the MAC address of the destination 192.168.1.1, for which Host B will reply.
• C.Host B will send a gratuitous ARP request to resolve the MAC address of the destination 192.168.1.1, for which Host A will reply.
• D.Host A will ignore any received ARP request intended for destination 192.168.1.1.

Comment: *

Name: *

Email: *

Verification: *