Which of the following devices is not mandatory in the PV+ESS on-grid scenario?
Correct Answer: B
Whole-house backup box. In an on-grid PV+ESS residential system, the essential components include PV modules, an inverter, and the ESS/battery system. The system operates while connected to the grid and can use solar generation and battery storage to improve self- consumption or reduce grid electricity use. A whole-house backup box, however, is mainly required when the system must support backup or off-grid operation during utility outages. Huawei Backup Box documentation describes the Backup Box as being used in residential rooftop PV systems to control the inverter's grid-tied or off-grid state. That means it becomes necessary for backup/off-grid functionality, not for a basic on-grid PV+ESS configuration. Therefore, modules and inverter are fundamental, but the whole-house backup box is optional unless backup power is required.
Question 17
Which Huawei safety feature continuously monitors for abnormal arc signatures in the DC circuit to prevent fire risk?
Correct Answer: B
AFCI (Arc Fault Circuit Interrupter) is a dedicated safety function that detects arc-fault signatures and trips the system to prevent fire. RSD (A) addresses shock hazard by de-energizing conductors, not arc detection. IV Curve Diagnosis (C/D) is a performance/fault diagnostic tool for identifying underperforming strings, not a real-time fire-safety mechanism.
Question 18
Which of the following features can reduce O&M costs?
Correct Answer: C
SOC means state of charge, and calibration is important in battery energy storage systems because inaccurate SOC estimation causes inefficient charge/discharge management, maintenance intervention, and possible capacity underutilization. Huawei's Smart String ESS positioning specifically identifies automatic SOC calibration as an O&M cost-reduction feature. Huawei states that automatic SOC calibration minimizes manual interventions and reduces operational costs, while other Huawei ESS material states that automatic SOC calibration eliminates the need for onsite O&M by experts and supports higher comprehensive energy efficiency. The other options do not directly match the "reduce O&M costs" wording. On/off-grid switchover is mainly a continuity and power-supply resilience feature. TOU is an energy-cost optimization strategy. Top explosion venting is a safety-pressure-relief design. Therefore, the feature directly associated with reduced O&M workload and lower maintenance cost is automatic SOC calibration.
Question 19
Huawei inverters support L4 intelligent arc protection, and the maximum arc detection range is 80 m.
Correct Answer: B
Because the wording makes 80 m sound like Huawei's absolute maximum arc-detection range. In Huawei AFCI positioning, L4 intelligent arc protection refers to advanced arc detection capability, fast shutdown response, and higher detection reliability. Huawei's AFCI white paper states that Huawei inverter AFCI performance reached the L4 level for detection scope, detection precision, and shutdown response time, but the later Huawei C&I safety positioning does not treat 80 m as the final maximum range for all scenarios. Huawei C&I materials show the arc-detection range evolving beyond 80 m for larger rooftop and commercial applications. Therefore, the statement is technically too restrictive: Huawei supports L4 intelligent arc protection, but "maximum arc detection range is 80 m" is not valid as a general Huawei capability statement.
Question 20
What are the challenges facing enterprises in building photovoltaic?
Correct Answer: A,B,D,E
The exact extract asks for the challenges enterprises face when building photovoltaic systems. The correct answer is A, B, D, E. Distributed power plants being unable to be managed in a unified manner is a real enterprise challenge because C&I customers often have multiple rooftops, sites, branches, or plants that require centralized monitoring and O&M. Not being able to fully use roof area is also a challenge because rooftop structures, shadows, orientations, fire lanes, and string limitations can reduce deployable PV capacity. Poor development quality and many faults reflect design, construction, commissioning, and O&M risks in distributed PV projects. Hidden safety hazards are also a major issue because DC arcs, insulation faults, rooftop high voltage, and ESS risks can affect personnel and assets. Option C is not selected because the issue is not that high-efficiency modules are unavailable; the bigger problems are management, roof utilization, quality, faults, and safety. Reference: Huawei HCSA-Sales-Smart PV V2.0 C&I Solution training extract.