Free International Code Council M2 Exam Dumps Questions & Answers

When a permit is issued, the code requires that one set of approved plans and specifications be returned to the applicant.
This set of plans and specifications shall be:

• A.kept on the building site.
• B.filed with the county clerk or jurisdiction to properly record the property.
• C.retained by the applicant for at least one year after the job is finished in the event modifications are made.
• D.returned to the architect.

Given: single-wall vent, which serves only one appliance, and has a height of 10 feet.
The maximum horizontal length permitted for a 5-inch diameter vent connector serving this vent is _____ feet.

• A.7.5
• B.9
• C.5
• D.10

Termination of vents for appliances listed for and installed outdoors that incorporate integral venting shall:

• A.be installed in accordance with their listings and the manufacturer's installation instructions.
• B.be installed in accordance with the design professional's plans as approved by the local building official.
• C.terminate not less than 5 feet vertically above the lowest connected appliance draft hood outlet or flue collar.
• D.terminate not less than 5 feet vertically above the highest connected appliance draft hood outlet or flue collar.

A cooling system with a condensate disposal system:

• A.shall not be less than 3/4-inch PVC pipe or equivalent approved material.
• B.shall have all horizontal sections of drain piping installed with a minimum of 1/4 inch per foot slope.
• C.shall be made of an approved pipe and be at least 1/2-inch in diameter.
• D.shall be made of approved corrosion-resistant material and shall not decrease in size from the drain pan connection to the place of condensate disposal.

A low-pressure steam heating boiler is a boiler furnishing a maximum steam pressure of _____ psi.

• A.[option text not fully visible in the material you sent]
• B.80
• C.[option text not fully visible in the material you sent]
• D.15