Free Microsoft 70-659 Exam Dumps Questions & Answers

You have 3 VMs configured in a cluster, Node1, Node2 and Node3.
You want to enable Quick Migrations and Live Migrations between all three nodes, but are unable to do so
because Node3 has a slightly different processor version from Node1 and Node2. Quick Migrations and
Live Migrations work between Node1 and Node2.
You need to get Quick Migrations and Live Migrations working between all three nodes. What should you do?

• A.Reduce the processors in each node to one processor
• B.Enable Node Processor Compatibility
• C.Enable Legacy Windows NT Processor Compatibility
• D.Enable VM Processor Compatibility

A company uses Windows Server 2008 R2 Domain Name System (DNS). You are configuring Remote Desktop (RD) Connection Broker load balancing. You add the necessary DNS entries for each RD Session Host server.
RD Connection Broker load balancing is not working.
You need to ensure that the Remote Desktop sessions are load-balanced across the RD Session Host server farm.
Which server option should you use? (To answer, select the appropriate setting or settings in the answer area.)

Point and Shoot:

Correct Answer:

Explanation:
To load balance sessions in an RD Session Host server farm, you can use the RD Connection Broker Load
Balancing feature together with Domain Name System (DNS) round robin. To configure DNS, you must
create a DNS host resource record for each RD Session Host server in the farm that maps the RD Session
Host server's IP address to the RD Session Host server farm name in DNS.
The following procedure provides the steps to configure DNS on a Windows Server 2008 R2-based domain
controller.
You must be a member of the Domain Admins, Enterprise Admins, or the DnsAdmins group to
complete this procedure.
To add DNS entries for each RD Session Host server in the farm
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS snap-in has been
installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name, expand Forward Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the RD Session Host server farm name.
The farm name is the virtual name that clients will use to connect to the RD Session Host server farm. Do
not use the name of an existing server. For management purposes, we recommend that you use the same
farm name that you specified when you configured the RD Session Host servers to join a farm in RD
Connection Broker.
In the IP address box, type the IP address of an RD Session Host server in the farm.
Click Add Host.
Repeat steps three through six for each RD Session Host server in the farm.
Important You must specify the same farm name in the Name (uses parent domain name if blank) box for each DNS entry.
For example, if you have three RD Session Host servers in a farm named FARM1, with IP addresses of 192.168.1.20, 192.168.1.21, and 192.168.1.22, the entries would look similar to the following:
Copy
Farm1
Host(A)
192.168.1.20
Farm1
Host(A)
192.168.1.21
Farm1
Host(A)
192.168.1.22
When you are finished, click Done. Note
By default, DNS round robin is enabled when using DNS on a Windows Server 2008 R2-based domain controller. The Enable round robin setting is available on the Advanced tab when you view the properties of the server in DNS.
http://technet.microsoft.com/en-us/library/cc772506.aspx

You install Windows Server 2008 R2 (Server Core Installation) on a server.
You need to be able to remotely manage storage on the server by using Disk Manager.
What should you do?

• A.Use the DISKPART utility to run the attributes volume clear readonly command for each volume.
• B.Install the Microsoft Remote Server Administration Tools (RSAT).
• C.Run the netsh advfirewall Firewall set rule group="Remote Volume Management" new enable=yes command.
• D.Run the netsh advfirewall Firewall set rule group="Remote Administration" new enable=yes command.

You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your Hyper-V environment.
The finance department uses a legacy application that is not supported on Windows Server 2008 R2. The application runs on a server that has the following configuration:
* Windows 2000 Server operating system * One 10GB hard disk, FAT formatted * 512 MB of RAM
You need to ensure that you can perform a physical-to-virtual (P2V) conversion of the server.
What should you do?

• A.Increase the server's RAM to at least 1024 MB.
• B.Run the convert c: /FS: NTFS command on the server.
• C.Use online P2V.
• D.Use offline P2V.

A company has a two-node Microsoft Hyper-V failover cluster that hosts virtual machines (VMs).
The company has the following VM administrative requirements:
-Users must be able to provision their own VMs.
-All VMs must be provisioned from Microsoft internet Explorer.
-Users must be able to connect to the VMs remotely.
-Delegated settings must not impact failover clusters that are deployed in the future.
You need to deploy a solution to meet the administrative requirements.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of answers choices to the answer and arrange them in the correct order)

Select and Place:

Correct Answer: