You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)

• A.cluster certificate
• B.server certificate
• C.root CA certificate
• D.ONTAP certificate

Comment: *

Name: *

Email: *

Verification: *

An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?

• A.Active IQ Upgrade Advisor
• B.Interoperability Matrix Tool
• C.NetAppDocs
• D.Active IQ Config Advisor

Comment: *

Name: *

Email: *

Verification: *

You want to connect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair that already has two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

• A.Add the shelf to the existing stack.
• B.Create a new stack on the HA pair to add the shelf.
• C.Connect the shelf to an HA pair with NSE drives.
• D.License NSE and add the shelf to this HA pair as a new stack.

Comment: *

Name: *

Email: *

Verification: *

You are setting up a peer relationship between two ONTAP clusters. In this scenario, which two statements are true regarding authentication?

• A.Peering authentication status can be verified with the cluster peer show command.
• B.Peering authentication can be configured using LDAP users and groups.
• C.Peering authentication is required before enabling peering encryption.
• D.Peering authentication can use an ONTAP generated passphrase.

Comment: *

Name: *

Email: *

Verification: *

After you install an AFF A700 2-node cluster with DS224C shelves, Config Advisor reports that your SAS cabling is in mixed-path HA. You expected the SAS cabling be in quad-path HA.
You physically verify the LED status on the controllers and the shelves and notice no irregularities. However, a reboot of the SAS expander does not change the output.
In this scenario, what should you do next?

• A.Open a case with NetApp Support and turn off the disk shelves until the issue is solved.
• B.Disconnect the disk shelves from the controller and run Config Advisor again.
• C.Re-seat the SAS IO modules of the affected AFF A700 controller.
• D.Use multipath HA because it is the only cabling supported on an AFF A700 controller.

Comment: *

Name: *

Email: *

Verification: *