You have a customer complaining of long build times from their NetApp ONTAP-based datastores. They
provided you packet traces from the controller and client. Analysis of these traces shows an average service
response time of 1 ms. QoS outputconfirms the same. The client traces are reporting an average of 15 ms in
the same time period.
In this situation, what would be your next step?

• A.The client that reports high latency should be investigated.
• B.The cluster is responding slowly and requires further investigation using performance archives.
• C.The cluster interconnects should be investigated.
• D.A sync core should be triggered.

Comment: *

Name: *

Email: *

Verification: *

You are troubleshooting a CIFS connection issue that is reported by some users. You decide to collect a packet trace.
In this scenario, after you generate the packet trace, where do you find the trace file?

• A./packet_traces of the node hosting the LIF
• B./etc/log/packet_traces of the node hosting the LIF
• C./etc/log/mlog/packet._traces Of all nodes
• D./vol0/paclcet_traces of the CIFS SVM

Comment: *

Name: *

Email: *

Verification: *

A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G Ethernet card in slot 4 for this purpose. The link comes up fine on node 2, but it will not come up on node 1. You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit.

What is the cause of the customer's problem?

• A.The cable is plugged in upside down.
• B.The incorrect cable is used.
• C.The ports are configured for 4x10Gbit instead of 40Gbit.
• D.The port has an incorrect SFP inserted.

Comment: *

Name: *

Email: *

Verification: *

You receive the panic message shown in the exhibit.

In this scenario, which component should you troubleshoot first?

• A.the CPU
• B.the PCI card in slot 3
• C.the MetroCluster FC-Vl card in slot 6
• D.the memory module in slot 1

Comment: *

Name: *

Email: *

Verification: *

You have a new VMware vSphere cluster with ESXI 7.0U2 hosts. The hosts are connected to a 4-node AFF A400 NetApp ONTAP 9.8 cluster with FC LUNs. You have a requirement to identify and follow I/Os from each VM on the shared FC LUN-backed datastores for troubleshooting purposes.
In this scenario, which VMware feature Is supported by ONTAP software to accomplish this task?

• A.Network I/O Control (NIOC)
• B.Virtual machine ID (VMID)
• C.Storage I/O Control (SIOC)
• D.vSphere Cluster Services (vCLS)

Comment: *

Name: *

Email: *

Verification: *