After imaging the nodes and creating the cluster successfully, the consultant connects the cluster to the customer network. When logging into Prism, the events dashboard is full of errors.
What is causing the issue?

• A.The cluster was not stopped prior to connecting to the customer network.
• B.The Cluster Virtual IP Address (VIP) was not set up during the process.
• C.Foundation did not create the cluster successfully.
• D.The consultant did not run Nutanix Cluster Check (NCC..

Comment: *

Name: *

Email: *

Verification: *

A consultant finishes creating a new ESXi cluster. The consultant connects to the nodes via laptop and a personal flat switch. The host/CVM network is on VLAN 23. The customer has the native VLAN on the ToR switches set to 23.
The customer wants to use LACP. Before placing the nodes on the customer network, the consultant tags VLAN 23 for each host and CVM. The consultant connects the nodes to the customer network and finds that they are unreachable.
What is causing this issue?

• A.The host and CVM are incorrectly configured.
• B.The customer has LACP fallback enabled on switch ports.
• C.Under the vSwitch0 settings, the consultant did not select Route based on IP hash.
• D.The hosts have not been migrated to a vSphere Distributed Switch.

Comment: *

Name: *

Email: *

Verification: *

In a 20-node ESXi deployment, the customer needs additional resiliency to survive the loss of two nodes concurrently.
Which configuration should the consultant use to ensure that the appropriate resources are available?

• A.Storage reservation for 10%; HA admission control for 10%, cluster RF2
• B.Storage reservation for 5%; HA admission control for 5%, cluster RF3
• C.Storage reservation for 5%; HA admission control for 5%, cluster RF2
• D.Storage reservation for 10%; HA admission control for 10%, cluster RF3

Comment: *

Name: *

Email: *

Verification: *

A consultant is setting up a new Hyper-V cluster. The customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two Hyper-V features can be used to meet the requirements? (Choose two.)

• A.Failover Clustering
• B.High Availability
• C.Distributed Resource Scheduler
• D.Performance Resource Optimization

Comment: *

Name: *

Email: *

Verification: *

A consultant successfully completes a Foundation using a flat switch. The consultant then works with the customer to move the cluster over to their production network. After the move, the CVMs and hypervisors can no longer communicate, which prevents the cluster from starting.
Which option should be used to resolve this issue?

• A.Verify that IPv6 Link Local and DHCP is enabled on all switch ports.
• B.If using VLANs, confirm the hypervisor/CVM VLAN is set as Native on the switch ports.
• C.Make sure that the IPMI and CVM VLAN is manually tagged on the Host and CVM.
• D.If the IPMI is in use, check that the IPMI can ping the default gateway over IPv6.

Comment: *

Name: *

Email: *

Verification: *