Which management tool required by HPE Infosight must be deployed at the customer site?

• A.HPE OneView
• B.HPE Global Dashboard
• C.HPE iLO Amplifier
• D.HPE StoreServ Management Console (SSMC)

Comment: *

Name: *

Email: *

Verification: *

An integrator prepares deployment documents with the list of all the hardware and software components. The integrator also needs a list of all infrastructure services deployed, with the functionality described.
Which services are provided by the vCenter Server component and should be placed in the report? (Choose two.)

• A.Lookup Service
• B.Update Manager
• C.Single Sign-On
• D.Auto Deploy
• E.Certificate Authority

Comment: *

Name: *

Email: *

Verification: *

A customer has a five-frame Synergy deployment with redundant Composers. An integrator needs to install Image Streamer.
What must the integrator consider before taking the planned action?

• A.The frame where the Image Streamer is being installed must not contain an Interconnect Module
• B.The location of the Image Streamer must be manually modified through the Composer
• C.Image Streamer requires the use of the MGMT port from both of the FLMs in the frame where the Image Streamer appliance is installed
• D.A connection to the management network must be established to an FLM in the same frame that houses the Image Streamer

Comment: *

Name: *

Email: *

Verification: *

Using SSMC, an integrator has added a new CPG on the HPE 3PAR StoreServ array integrated with HPE Composer.
The new CPG is not visible in the HPE Composer.
What must the integrator do to see the new CPG in the HPE Composer console?

• A.Run the refresh procedure on the 3PAR StoreServ array from HPE Composer
• B.Add the CPG to the Storage Components scope using the SSMC interface.
• C.Run the discovery process on the 3PAR StoreServ array from the SSMC interface.
• D.Add the CPG using the HPE Composer interface.

Comment: *

Name: *

Email: *

Verification: *

Using a laptop, how can an integrator perform the initial setup on an HPE Synergy 12000 Frame?

• A.Connect a CAT5 cable to the MGMT port of the top Frame Link Module, and connect to the HPE Synergy console with VNC to the address 306.025 port 5900.
• B.Connect a CAT5 cable to the front panel module, use the HPE Synergy default IP address of
  192.168.10.1, port 5900, and connect to the HPE Synergy console with a web browser.
• C.Connect a CAT5 cable to the MGMT port of the top Frame Link Module, and connect to the HPE Synergy console with a web browser to the address 192.168.10.1, port 5900.
• D.Connect a CAT5 cable to the front panel module, use the HPE Synergy default IP address of
  192.168.10.1, port 5900, and connect to the HPE Synergy console with VNC.

Comment: *

Name: *

Email: *

Verification: *