Examine the attached diagram

Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?

• A.Server 1 can access the core layer via both uplinks.
• B.Server 2 cannot access the core layer.
• C.Server 1 and Server 2 can communicate with each other via the core layer.
• D.Server 2 can successfully access the core layer via the keepalive link.

Comment: *

Name: *

Email: *

Verification: *

Examine the network exhibit.

A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?

• A.User-based tunneling (UBT)
• B.Classifier policies
• C.OSPF route maps using the "set metric" command
• D.Policy-based routing (PBR)

Comment: *

Name: *

Email: *

Verification: *

A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.
What should the administrator do to fix this problem?

• A.Define the 239.0.0.1 stream on the PIM candidate bootstrap router
• B.Define the 239.0.0.1 stream on the rendezvous point (RP)
• C.Change the destination multicast address to 239.1.1.1
• D.Verify that IGMP is enabled between the switches connecting the multicast source and receivers

Comment: *

Name: *

Email: *

Verification: *

What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?

• A.Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
• B.Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
• C.Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
• D.Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN

Comment: *

Name: *

Email: *

Verification: *

A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of "Unknown".
What is the cause of this issue?

• A.A connectivity issue exists between NAE and the AOS-CX switch
• B.The administrator does not have the appropriate credentials to interact with NAE
• C.The RESTful API has not been enabled on the AOS-CX switch
• D.The number of scripts or agents has exceeded the hardware's capabilities

Comment: *

Name: *

Email: *

Verification: *