A customer has critical wired endpoints. However, each endpoint has a single Ethernet connection to the network. The customer wants redundancy in the switch access layer to minimize the chances that an endpoint will lose this connection The architect plans to deploy two Aruba CX 6405 switches in the closet.
Which plan provides the greatest redundancy for this scenario?

• A.The 6405 switches are not in a vsF fabric, and have redundant power supplies but not redundant management modules.
• B.The 6405 Switches are in a VSF fabric, so the individual switches do not need redundant components.
• C.The 6405 switches are in a VSX fabric, and each has a redundant management module but not a redundant power supply.
• D.The 6405 switches are not in a VSX fabric, and have redundant power supplies and redundant management modules.

Comment: *

Name: *

Email: *

Verification: *

For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?

• A.The Aruba CX 630DM support up to 75W PoE+ per port
• B.The customer wants to utilize LACP on AP515 in VSF switch configuration.
• C.The Aruba CX6300M supports 10GBase-T connectivity with AP-515.
• D.The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.

Comment: *

Name: *

Email: *

Verification: *

An archinect needs lo plan a Mobility Master (MM) solution for a customer Requirements include:
* redundancy for the MM
* redundancy for the MCS (seamless failover if up to one fails)
The wireless network consists of
* total APs - 300
* total wireless devices = 20,000
* total MCs = 10
The customer wants the most cost-effective plan that meets me requirements.
Which plan for MMs should the architect select?

• A.1 MM-HW-5K and 1 MM-VA-1K
• B.2 MM-HW-1QK
• C.2 MM-HW-5K
• D.1 MM-HW-5K and 1 MM-HW-1K

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

The exhibit shows the topology for a new Aruba solution. The MCs are in a ctuster and support all of the wireless traffic in the network The core switches route all traffic and support all VLANS. The access fayer switches do NOT use tunneiednode. or dynamic segmentation.
The customer has indicated that it has these VLANS for user devices.
* VLAN 11 for Floori employee wired devices
* VLAN 12 for Floor 2 employee wired devices
* VLAN 13 tor Floor 3 employee wired devices
* VLAN 14 for Floor 4 employee wired devices
* VLAN 15 for Floor 5 employee wired devices
* VLAN 101 for all employee wireless devices
* VLAN 102 for all guest wireless devices
In which locations should the architect plan the VLANs?

• A.VLANs 11-15 on the access layer switches on the corresponding floor; VLAN 101 on one MC and VLAN 102 on me other MC
• B.VLANS 11-15 on the access layer switches on the corresponding floor; VLANS 101 and 102 on both MCS.
• C.VLANs 11-15. 101. and 102 on both MCs. (Other VLANs will be used on the access layer switches.)
• D.VLANs 11-15 on one MC. VLANs 101 and 102 on the other MC. (Other VLANs will be used on the access layer switches.)

Comment: *

Name: *

Email: *

Verification: *

A customer has a large network, which includes a main site and many branch sites. The network has a total of about 10.000 wireless devices at the main site and 15,000 wireless devices total at branches.
To fulfill the requirements for a wireless network upgrade, the architect plans to propose;
* 2 7205 MCs at the main site
* 2 7210 MCs at the main site
* 10 7030 MCs at branch sites
* 200 RAPs at branch sites
* 500 CAPS at the main site
* 300 CAPS at branch sites
What is the most cost-effective Mobility Master solution that meets the requirements'?

• A.MM-HW-1K appliance
• B.MM-HW-5K appliance
• C.MM-HW-1OK appliance
• D.MM-HW-5K appliance + MM-HW-5k appliance

Comment: *

Name: *

Email: *

Verification: *