Exhibit:

R2 is receiving a route from R1 and you must ensure that the route is not advertised to R3.
Referring to the exhibit, which two configurations on R2 will solve the issue? (Choose two.)

• A.Apply the no-advertise policy as an import policy under group G5001
• B.Apply the no-export policy as an export policy under group 65003
• C.Apply the no-export policy as an import policy under group 65001
• D.Apply the no-advertise policy as an export policy under group 65003

Comment: *

Name: *

Email: *

Verification: *

Exhibit:

Referring to the exhibit, you have recently established a Layer 3 VPN between PE-1 and PE-2, connecting the two CE sites. Rowing information is being shared between sites and the customer has two-way communication After adding this VPN to your core network, PE-1 and PE-2 are no longer able to forward traffic to the Internet.
In this scenario, what is the problem?

• A.You must configure the inet unicast NLRI for the BGP session on both your PE devices.
• B.You must configure a separate internal BGP group on both your PE devices specifically for Internet connectivity.
• C.You must configure the inet-vpn NLRI for the BGP sessions on both your PE devices.
• D.You must configure a multihop external BGP session between your PE devices and the Internet provider's ISP-A device.

Comment: *

Name: *

Email: *

Verification: *

Exhibit:

All networks shown in the exhibit contain more than one BGP speaker You operate ISP A and must ensure that Customer Y sends their traffic to you over the directly connected link. Customer Y is not to be used for transit into your network.
What would you do to accomplish this task?

• A.Advertise routes to Customer X with the well-known no-advertise community.
• B.Advertise routes to Customer Y with the well-known no-export community
• C.Advertise routes to Customer Y with the custom defined 65535:65535 community.
• D.Advertise routes to Customer X with the custom defined 0:0 community

Comment: *

Name: *

Email: *

Verification: *

Exhibit:

You have a Layer 3 VPN established between PE-1 and PE-2 as well as between PE-1 and PE-3. You are using a route reflector (RR-1) to distribute VPN routes to your IBGP peers. You are asked to ensure that only relevant routes are sent from RR-1 to each of the PE routers.
Referring to the exhibit, which statement is correct?

• A.You should use firewall filtering on RR-1 and all the PE devices to control which routes are sent to each PE router.
• B.You should use route target filtering only on RR-1 to control which routes are sent to each PE router.
• C.You should use route target filtering on RR-1 and all the PE devices to control which routes are sent to each PE router.
• D.You should use VRF export policies on RR-1 to control which routes are sent to each PE router.

Comment: *

Name: *

Email: *

Verification: *

Exhibit:



R4 is directly connected to both RPs (R2 and R3). R4 is currently sending all joins upstream to R3 but you want to load balance the joins between both RPs Referring to the exhibit, which configuration change will solve this issue?

• A.Configure the default route in inet.2 on R4 from R3 as the next hop to both R3 and R2.
• B.Configure the bootstrap priority on R2 to be the same as R3.
• C.Configure the group-range parameter to be the same on R2 and RCA
• D.Configure the join-load-balance parameter under PIM on R4.

Comment: *

Name: *

Email: *

Verification: *