You are using AFF storage with the NVMe storage protocol on your Linux clients.
In this scenario, which NVMe feature must be present and enabled for the client to see storage failover happen?

• A.Multi-Path I/O (MPIO)
• B.Asymmetric Logical Unit Access (ALUA)
• C.NVMe Qualified Name (NQN)
• D.Asymmetric Namespace Access (ANA)

Comment: *

Name: *

Email: *

Verification: *

A customer explains that their V3170 NetApp controller has failed over and they do not know what to do next.
In this scenario, what information should the customer collect from the Remote LAN Module (RLM) and send to you? (Choose two.)

• A.output from the events info command
• B.output from the sp status command
• C.output from the system log command
• D.output from the events all command

Comment: *

Name: *

Email: *

Verification: *

A customer ordered a FAS2720 cluster with 8 TB SATA drives. The customer wants to use the Advanced Drive Partitioning (ADP) feature to avoid consuming the high capacity drives for the root aggregate. Before you use the cluster setup, you issue the aggr status command and notice that ADP is not being used.
In this scenario, what would you use to implement ADP?

• A.nodeshell
• B.loader prompt
• C.special boot menu
• D.SP prompt

Comment: *

Name: *

Email: *

Verification: *

A customer recently had a controller module failure on a FAS62xx system running clustered Data ONTAP 8.3.1.
The controller module had been replaced last night and everything is working well but the customer noticed warnings concerning licensing on the console. The warnings say there is a grace period of 89 days remaining.
In this scenario, what should be done to solve this problem?

• A.Collect the new license keys from the new controller module packaging and install them using the appropriate commands.
• B.Execute a system restore to recover the previous license keys, and then apply to the new controller module.
• C.Apply the previously used license keys using the appropriate commands.
• D.Obtain new 8.2x format license keys and install them using the appropriate commands.

Comment: *

Name: *

Email: *

Verification: *

Snap Drive for Windows has been installed and configured on a VMware virtual machine. The virtual machine has been configured with raw device mappings (RDMs) that are mapped to LUNs on a NetApp storage controller.
The RDMs can be seen as connected disks in Windows Disk Management.
However, Snap Drive is not enumerating the RDMs.
Which action will solve the problem in this scenario?

• A.Snap Drive must be installed on tin* VhtualCenter server.
• B.Snap Drive and Virtual Storage Console (VSC) integration must be configured.
• C.Virtual Center or ESX servor logon settings must bo enabled and configured.
• D.Snap Drive must have the preferred storage IP addresses configured.

Comment: *

Name: *

Email: *

Verification: *