1000 branches are to be deployed on Prisma SD-WAN with the following constraints:
* Devices will be shipped in batches directly to the site
* Configuration Management Database (CMDB) has all the necessary details for a site deployment
* Field tech will be responsible for rack, stack, and cabling of the IONs at each site
* Field tech will need to spend minimum amount of time at each branch site to reduce the cost
* The NOC operates in shifts and is responsible for remote cutover support Which method will achieve the mass deployment in shortest possible time?

• A.Connect the ION to the LAN switch to bring it online, configure the device using the legacy network, connect the ISP modem or cellular, and cutover the site once the ION is configured.
• B.Connect the device to the ISP modem or use cellular, use device shell to pre-create the configuration for a site, assign the device to the template when device is online, and connect the LAN switch to the ION.
• C.Use site templates and device shells to pre-create the configuration using CSV bulk upload, connect the device to the ISP modem or using cellular, assign the device to the template when device is online, and connect the LAN switch to the ION.
• D.Connect the device to the ISP modem or use cellular, use Prisma SD-WAN Software Development Kit (SDK) using API method for site deployment once the device is online, connect the LAN switch to the ION.

Comment: *

Name: *

Email: *

Verification: *

There are periodic complaints about the poor performance of a real-time application.

What can be inferred about the performance issue, based on the Network Transfer Time (NTT) and Server Response Time (SRT) image below?

• A.The NTT value increases periodically resulting in higher SRT.
• B.The NTT value drops periodically due to network related issues.
• C.The SRT value increases periodically due to Application Server side issues.
• D.The SRT value drops periodically due to Application Server side issues.

Comment: *

Name: *

Email: *

Verification: *

When an ION device has been claimed, the cloud-based controller generates and communicates with the device by which method?

• A.Manufacturer Installed Certificate (MIC)
• B.Existing customer public key infrastructure (KPI)
• C.Self-signed certificate
• D.Customer Installed Certificate (CIC)

Comment: *

Name: *

Email: *

Verification: *

When troubleshooting an issue at a site that is running on two cellular links from two carriers, the operations team shared some evidence shown in the graph below:
(SNR Graph showing Carrier-1 in blue dropping to near 0 dB and Carrier-2 in green staying relatively stable between 4.5 dB and 6.5 dB)

For the time duration shown in the graph, what are two inferences about the site's traffic that can be made? (Choose two.)

• A.Using Carrier-1 as the WAN path may have experienced some performance degradation.
• B.Using Carrier-2 as the WAN path may have experienced some performance degradation.
• C.Using Carrier-2 as the WAN path may have switched over to Carrier-1.
• D.Using Carrier-1 as the WAN path may have switched over to Carrier-2.

Comment: *

Name: *

Email: *

Verification: *

An administrator is configuring a High Availability (HA) pair of ION 3000 devices at a Data Center.
Which statement accurately describes the requirement for the HA Control Interface connection between the two devices?

• A.The HA Control interface must be connected via a Layer 3 routed network to ensure reachability across different subnets.
• B.The HA Control interface must be a direct physical connection or a Layer 2 adjacent connection on a dedicated VLAN, with no routing between them.
• C.The HA Control connection is optional if both devices are managed by the same Cloud Controller.
• D.The HA Control interface uses the management port and must be connected to the internet.

Comment: *

Name: *

Email: *

Verification: *