A project's installed water fixtures do not exceed WaterSense maximum levels. Which compliance path should the LEED AP select under Water Efficiency Prerequisite, Indoor Water Use Reduction, and what type of documentation is required to demonstrate compliance with this path?

• A.Compliance Path 2: Usage-Based Calculation; prescriptive compliance confirmation
• B.Compliance Path 2: Usage-Based Calculation; appliance water calculations
• C.Compliance Path 1: Prescriptive Achievement; indoor water use calculations
• D.Compliance Path 1: Prescriptive Achievement; product cutsheets

Comment: *

Name: *

Email: *

Verification: *

What is the best strategy for a LEED AP to suggest in order to quantify the impact of increasing the window- to-wall ratio on a Building Design and Construction project?

• A.Compare the current project to other similar projects
• B.Monitor the HVAC loads throughout the life of the project
• C.Perform a simple box energy model before the completion of the schematic phase
• D.Review Green Business Certification Inc. (GBCI)'s comments on the energy model submission

Comment: *

Name: *

Email: *

Verification: *

When working on a renovation project, asbestos containing materials have been found on the perimeter walls.
When calculating the percentage of building being reused under the Materials and Resources Credit, Building Life-Cycle Impact Reduction, the materials remediated will be

• A.included in the calculation
• B.excluded from the calculation
• C.excluded if the total volume is less than 25% of the building being reused
• D.excluded if the total volume is more than 25% of the building being reused

Comment: *

Name: *

Email: *

Verification: *

What is the basis of energy consumption in determining the percentage of green power or carbon offsets?

• A.Quality
• B.Quantity
• C.Efficiency
• D.Performance

Comment: *

Name: *

Email: *

Verification: *

A design team pursuing LEED for a new office building project calculated that with the water fixtures specified for the project, a 24% water reduction can be achieved compared to the LEED baseline. What does this mean to the team in terms of pursuing LEED?

• A.The project cannot pursue LEED
• B.The project may pursue Water Efficiency Credit, Indoor Water Use Reduction
• C.The project does not meet Water Efficiency Prerequisite, Indoor Water Use Reduction, but can make up the points elsewhere in the rating system
• D.The project can meet the Water Efficiency Prerequisite, Indoor Water Use Reduction, but cannot earn any points under Water Efficiency Credit, Indoor Water Use Reduction

Comment: *

Name: *

Email: *

Verification: *