Refer to the exhibit.

A web browser displays a "not secure" warning message when accessing the web interface of Cisco UCS Manager. Which action resolves the issue?

• A.Use a supported web browser.
• B.Use a supported version of UCS Manager.
• C.Use the correct TCP port for HTTPS.
• D.Load third-party certificate to UCS Manager.

Comment: *

Name: *

Email: *

Verification: *

A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?

• A.1. Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
  2. Verify that at least two physical cables between the IOM and fabric interconnect function properly.
  3. Check for runtime link down status.
  4. Reseat the affected IOM.
• B.1. Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
  2. Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
  3. Check for runtime link down status.
  4. Reseat the affected IOM.
• C.1. Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
  2. Verify that at least two physical cables between the IOM and fabric interconnect function properly.
  3. Check for runtime link down status.
  4. Reseat the affected IOM.
• D.1. Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
  2. Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
  3. Check for runtime link down status.
  4. Reseat the affected IOM.

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit. An engineer is investigating a role mapping issue on a switch. The users report that they cannot view the IP addresses under the tenant "corp". Which action resolves the issue?

• A.Add the users to the RADIUS server.
• B.Update the UNIX ID.
• C.Configure the correct secret password between the APIC and the RADIUS server.
• D.Add the updated avpair to include/corp/admin/

Comment: *

Name: *

Email: *

Verification: *

An engineer must replace a failed memory on a Cisco UCS B-Series Blade Server. After the replacement was done, the server has a "resolve slot" warning. Which server maintenance action resolves the issue?

• A.Perform diagnostic interrupt on the server.
• B.Re-acknowlegement the server.
• C.Reset the server.
• D.Decomission the server.

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit. A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?

• A.Replace the SFP port module in fc2/10.
• B.Configure the admin port type E on the upstream switch that connects the port.
• C.Enable NPIV on the upstream switch that connects the port.
• D.Configure the BB_credit buffers on the upstream switch that connects the port.

Comment: *

Name: *

Email: *

Verification: *