Refer to the exhibit.

An attempt to bind the Ethernet interface to vFC fails. Which action resolves the issue?

• A.Configure the interface as a trunk port.
• B.Configure the interface to use the native VLAN of the trunk port.
• C.Configure the FCoE VLAN that corresponds to the vFC VSAN as a private VLAN.
• D.Add the FCoE VLAN to the allowed VLAN list.

Comment: *

Name: *

Email: *

Verification: *

A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?

• A.1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
  2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
  3) Check for runtime link down status
  4) Reseat the affected IOM.
• B.1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
  2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
  3) Check for runtime link down status
  4) Reseat the affected IOM.
• C.1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
  2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
  3) Check for runtime link down status.
  4) Reseat the affected IOM.
• D.1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
  2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
  3) Check for runtime link down status.
  4) Reseat the affected IOM.

Correct Answer: B

Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooti

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

An engineer must connect N2K-Fex-1 and N5K-Core-1 so that the traffic flow between the two devices uses load balancing. After inspecting the statistics of the interconnecting interfaces, the engineer concludes that only one link is used. Which action resolves the problem?

• A.Configure source-destination load balancing on N5K-Core-1.
• B.Configure each uplink to be a member of a separate LACP port channel.
• C.Configure the pinning max-link as 2.
• D.Configure destination-mac load balancing on N5K-Core-1

Correct Answer: C

Explanation
https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/n5k/commands/pinning-max-links.html

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit. An engineer troubleshoots why user 1, user 2, and user 3 from the group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?

• A.Configure the role name to match the group name on Microsoft Active Directory.
• B.Include specific users in the Cisco MDS role configuration.
• C.Configure SSH logins on the Cisco MDS switch.
• D.Integrate Cisco MDS with Microsoft Active Directory.

Comment: *

Name: *

Email: *

Verification: *

Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.

Correct Answer:

Comment: *

Name: *

Email: *

Verification: *