An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks.
Which statement about what occurs when the new uplinks are added is true?

• A.Only new connections use the new uplinks automatically.
• B.Paths must be defined before new connections can use the new uplinks.
• C.All connections must be reset before the new uplinks can be used.
• D.New and existing connections use the new uplinks automatically.

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?

• A.Configure the role name to match the group name on Microsoft Active Directory.
• B.Include specific users into MDS role configuration.
• C.Integrate Cisco MDS with Microsoft Active Directory.
• D.Configure SSH logins on Cisco MDS switch.

Comment: *

Name: *

Email: *

Verification: *

During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a "No Signal" message from the vKVM and physical connection. Which set of steps resolves the issue?

• A.1- Disconnect the power cord
  2- Confirm that all cards are property seated
  3- Connect the power cord and power on the server
• B.1- Power off the server and disconnect the power cord
  2- Confirm that all cards are property seated
  3- Connect the power cord and power on the server
• C.1- Power off the server and disconnect the power cord
  2- Confirm that all cards are available
  3- Connect the power cord and power on the server
• D.1- Disconnect the power cord
  2- Confirm that all cards are properly seated
  3- Connect the power cord

Correct Answer: B

Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/ts/guide/b_C-Series_Troubleshooting_Guide.pd

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

An attempt to bind the Ethernet interface to vFC fails. Which action resolves the issue?

• A.Add the FCoE VLAN to the allowed VLAN list.
• B.Configure the interface as a trunk port.
• C.Configure the FCoE VLAN that corresponds to the vFC VSAN as a private VLAN.
• D.Configure the interface to use the native VLAN of the trunk port.

Comment: *

Name: *

Email: *

Verification: *

A fabric interconnect fails to start and the console displays the loader prompt. Which two actions resolve the issue? (Choose two.)

• A.Reconnect L1/L2 cables between the Fis.
• B.Load an uncorrupt kickstart image.
• C.Load the correct version of the boot image.
• D.Reformat the fabric interconnect.
• E.Load an uncorrupt bootloader image.

Comment: *

Name: *

Email: *

Verification: *