Refer to the exhibit. Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.
* WAN-1 is for normal business-day activities.
* WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.
The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?

• A.The event timer must be written in epoch time format.
• B.The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.
• C.The Cron entry must be configured without double quotes.
• D.The applet called "Backup" must include an action to remove the current static route.

Comment: *

Name: *

Email: *

Verification: *

One of Cisco Nexus Series interfaces has become errdisabled with the error message "DCX-No ACK in
100 PDUs". What is the cause of this error?

• A.The host has not responded to the Control Sub-TLV DCBX exchanges of the switch.
• B.The acknowledgement number in the server response has not incremented for 100 exchanges.
• C.Cisco Discovery Protocol is disabled on the switch.
• D.LLDP is disabled on the switch.

Comment: *

Name: *

Email: *

Verification: *

A fabric interconnect fails to start and the console displays the loader prompt. Which two actions resolve the issue? (Choose two.)

• A.Load an uncorrupt bootloader image.
• B.Load an uncorrupt kickstart image.
• C.Reconnect L1/L2 cables between the Fis.
• D.Reformat the fabric interconnect.
• E.Load the correct version of the boot image.

Comment: *

Name: *

Email: *

Verification: *

A Cisco UCSB-Series Blade Server is configured to boot a VMwareESXi host from an EMC VNX storage array by using a Fibre Channel SAN. The boot order is confirmed to be configured as expected but the server fails to boot from the SAN. Which action reserves the problem?

• A.Set the boot LUN to the highest LUN ID in the storage array
• B.Set the same WWPN pools for vHBA adapters
• C.Set the same WWNN pools for vHBA adaptor
• D.Set the boot LUN to the lowest LUN ID in the storage array

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?

• A.Port 15 is configured as an Ethernet port.
• B.Port 15 is missing a license.
• C.The polarity of the fiber cable is reversed.
• D.Port 15 is configured for 4-Gb FC.

Comment: *

Name: *

Email: *

Verification: *