-- Exhibit -



-- Exhibit --
Refer to the exhibits.
Users are able to access the application when connecting to the virtual server but are unsuccessful when connecting directly to the application servers. The LTM Specialist wants to allow direct access to the application servers.
Why are users unable to connect directly to the application servers?

• A.The LTM device does NOT have an IP Forwarding virtual server on the Internal VLAN.
• B.The web server does NOT have a correct default gateway.
• C.The LTM device does NOT have a SNAT on the External VLAN.
• D.The router does NOT have a route to the server subnet.
• E.The LTM device does NOT have an IP Forwarding virtual server on the External VLAN.

Comment: *

Name: *

Email: *

Verification: *

An application is configured on an LTM device:
Virtual server: 10.0.0.1:80 (VLAN vlan301)
SNAT IP: 10.0.0.1
Pool members: 10.0.1.1:8080, 10.0.1.2:8080, 10.0.1.3:8080 (VLAN vlan302)
Which packet capture should the LTM Specialist perform on the LTM device command line interface to capture only server traffic specifically for this application?

• A.tcpdump -ni 0.0:nnn -s 0 'host 10.0.0.1' -w /var/tmp/trace.cap
• B.tcpdump -ni vlan301 -s 0 'port 80 and host 10.0.0.1' -w /var/tmp/trace.cap
• C.tcpdump -ni 0.0:nnn -s 0 '(port 80 and host 10.0.0.1) or (port 8080 and host 10.0.1.1 or host 10.0.1.2 or host 10.0.1.3)' -w /var/tmp/trace.cap
• D.tcpdump -ni vlan302 -s 0 'port 8080 and (host 10.0.1.1 or host 10.0.1.2 or host 10.0.1.3)' -w /var/tmp/trace.cap

Comment: *

Name: *

Email: *

Verification: *

An LTM Specialist configures two LTM devices in a high-availability pair with trusts established and device groups configured properly using network failover. After several months, the LTM Specialist notices that changes made to one LTM device do NOT cause the synchronization status to update to "changes pending," and this device does NOT synchronize with the device group.
Which two steps should the LTM Specialist take to identify the issue? (Choose two.)

• A.Verify that the devices are not using self-signed certificates.
• B.Verify that port lockdown on the ConfigSync interface is set to allow port 1026.
• C.Verify that NTP is synchronized.
• D.Verify that ConfigSync is using the management IP address.
• E.Verify the network connectivity between the devices.

Comment: *

Name: *

Email: *

Verification: *

An LTM Specialist configures a new HTTP virtual server on an LTM device external VLAN. The web servers are connected to the LTM device internal VLAN. Clients trying to connect to the virtual server are unable to establish a connection. A packet capture shows an HTTP response from a web server to the client and then a reset from the client to the web server.
From which two locations could the packet capture have been collected? (Choose two.)

• A.network interface of client machine
• B.management VLAN interface of the LTM device
• C.internal VLAN interface of the LTM device
• D.external VLAN interface of the LTM device
• E.network interface of web server

Comment: *

Name: *

Email: *

Verification: *

An LTM Specialist is troubleshooting a problem on an eCommerce website. The user browses the online store using port 80, adding items to the shopping cart. The user then clicks the "Checkout" button on the site, which redirects the user to port 443 for the checkout process. Suddenly, the user's shopping cart is shown as empty.
The shopping cart data is stored in memory on the server, and the default source address persistence profile is used on both virtual servers.
What is the issue?

• A.The port 80 pool member is deleting the user's session cookie.
• B.The port 80 and port 443 connections are balanced to the same node.
• C.The port 443 pool member is deleting the user's session cookie.
• D.The port 80 and port 443 connections are balanced to different nodes.

Comment: *

Name: *

Email: *

Verification: *