An LTM Specialist must perform a packet capture on a virtual server with an applied standard FastL4 profile. The virtual server 10.0.0.1:443 resides on vlan301.
Which steps should the LTM Specialist take to capture the data payload successfully while ensuring no other virtual servers are affected?

• A.The packet capture tcpdump -ni vlan301 should be executed on the command line interface. There is no need to change profiles or PVA acceleration.
• B.The LTM device is under light load. The traffic should be mirrored to a dedicated sniffing device. On the sniffing device, the packet capture tcpdump -ni vlan301 should be executed.
• C.The standard FastL4 profile should have PVA acceleration disabled. Then the packet capture tcpdump -ni vlan301 should be executed on the command line interface.
• D.A new FastL4 profile should be created and applied to the virtual server with PVA acceleration disabled. Then the packet capture tcpdump -ni vlan301 should be executed on the command line interface.

Comment: *

Name: *

Email: *

Verification: *

A web application requires knowledge of the client's true IP address for logging and analysis purposes. Instances of the application that can decode X-Forwarded-For HTTP headers reside in pool_a, while pool_b instances assume the source IP is the true address of the client.
Which iRule provides the proper functionality?

• A.when HTTP_DATA { if {[HTTP::header exists X-Forwarded-For]}{ pool pool_a } else { pool pool_b } }
• B.when HTTP_REQUEST { if {[HTTP::header exists X-Forwarded-For]}{ pool pool_a } else { pool pool_b } }
• C.when HTTP_OPEN { if {[HTTP::header exists X-Forwarded-For]}{ pool pool_a } else { pool pool_b } }
• D.when HTTP_RESPONSE { if {[HTTP::header exists X-Forwarded-For]}{ pool pool_a } else { pool pool_b } }

Comment: *

Name: *

Email: *

Verification: *

An LTM device pool has suddenly been marked down by a monitor. The pool consists of members
10.0.1.1:443 and 10.0.1.2:443 and are verified to be listening. The affected virtual server is
10.0.0.1:80.
Which two tools should the LTM Specialist use to troubleshoot the associated HTTPS pool monitor via the command line interface? (Choose two.)

• A.tcpdump
• B.ssldump
• C.telnet
• D.curl

Comment: *

Name: *

Email: *

Verification: *

An LTM HTTP pool has an associated monitor that sends a string equal to 'GET /test.html'.
Which two configurations could an LTM Specialist implement to allow server administrators to disable their pool member servers without logging into the LTM device? (Choose two.)

• A.Set 'receive string' equal to 'SERVER UP and ask the server team to set string 'SERVER DOWN' in test.html.
• B.Set 'alias' equal to 'SERVER DOWN' and ask the server team to set string 'SERVER DOWN' in test.html.
• C.Set 'disable pool member' equal to 'SERVER UP' and ask the server team to set string 'SERVER DOWN' in test.html.
• D.Set monitor to transparent and ask the server team to set string 'TRANSPARENT' in test.html.
• E.Set 'receive disable string' equal to 'SERVER DOWN' and ask the server team to set string 'SERVER DOWN' in test.html.

Comment: *

Name: *

Email: *

Verification: *

-- Exhibit -

-- Exhibit --
Refer to the exhibit.
An LTM Specialist sets up AVR alerts and notifications for a specific virtual server if the server latency exceeds 50ms. The LTM Specialist simulates a fault so that the server latency is consistently exceeding the 50ms threshold; however, no alerts are being received.
Which configuration should the LTM Specialist modify to achieve the expected results?

• A.SNMP alerting should be enabled to allow e-mail to be sent to the support team.
• B.The rule should be adjusted to trigger when server latency is above 50ms.
• C.User Agents needs to be enabled to ensure the correct information is collected to trigger the alert.
• D.The metric "Page Load Time" needs to be enabled to ensure that the correct information is collected.

Comment: *

Name: *

Email: *

Verification: *