A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection Close/r/n/r/n Which CLI tool syntax will show that the web server returns the correct HTTP response?

• A.curlhttp://10.10.10.3.75:8080/www.example.com/index.html
• B.tracepath 10.10.3.75:8080 GET /index
• C.curl-header
  'Host:www.example.com' http://10.10.3.75:8080/
• D.tracepath
  'http://www.example.com:80

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.


During maintenance, the BIG-IP Administrator manually disables a pool member as shown.
What is the result?

• A.The disabled pool member stops processing existing connections
• B.All pool members stop accepting new connections.
• C.The disabled pool member stops processing persistent connections.
• D.All pool members continue to process persistent connections

Comment: *

Name: *

Email: *

Verification: *

A BIG-IP system has the following configuration:
* SNAT is set to Auto Map
* There are two VLANs internal and external
* Default route is pointed to the gateway on external VLAN
* Self P for internal VLAN is 1921.1.2
* Self IP for external VLAN is 192.1.2.2
* Floating IP addresses for internal VLAN is 192.1.1.1
* Floating IP addresses for external VLAN is 192.1.2.1
* The Virtual Server IP address is 192.1.1.100
Which IP address does the BIG-IP system use first when traffic reaches the servers on the internal VLAN?

• A.192.1.1.100
• B.192.1.2.1
• C.192.1.1.1
• D.192.1.2.2

Comment: *

Name: *

Email: *

Verification: *

A BIG-IP device sends out the following SNMP trap:
big-ipo.f5.com - bigipExternalLinkChange Link: 1.0 is DOWN
Where in the BIG-IP Configuration utility should the BIG-IP Administrator verify the current status of Link
1.0?

• A.System > Platform
• B.Network > Trunks > Trunk List
• C.Statistics > Performance > System
• D.Network > Interfaces > Interface List

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

The BIG-IP Administrator has modified an iRule on one device of an HA pair. The BIG-IP Administrator notices there is NO traffic on the BIG-IP device in which they are logged into.
What should the BIG-IP Administrator do to verify if the iRule works correctly?

• A.Push configuration from this device to the group and start to monitor traffic on this device
• B.Pull configuration to this device to the cluster and start to monitor traffic on this device
• C.Log in to the other device in the cluster, push configuration from it, and start to monitor traffic on that device
• D.Log in to the other device in the cluster, pull configuration to it, and start to monitor traffic on that device

Comment: *

Name: *

Email: *

Verification: *