What is the MINIMUM lighting requirement for telecommunications spaces?

• A.500 lux (46 foot-candles) of lighting in the horizontal plane and 500 lux (46 foot-candles) of lighting in the vertical plane measured at 1 meter (3.28 feet) above the finished floor
• B.200 lux (18.6 foot-candles) of lighting in the horizontal plane and 500 lux (46 foot-candles) of lighting in the vertical plane measured at 1 meter (3.28 feet) above the finished floor
• C.50 lux (4.6 foot-candles) of lighting in the horizontal plane and 20 lux (1.9 foot-candles) of lighting in the vertical plane measured at 1 meter (3.28 feet) above the finished floor
• D.500 lux (46 foot-candles) of lighting in the horizontal plane and 200 lux (18.6 foot-candles) of lighting in the vertical plane measured at 1 meter (3.28 feet) above the finished floor

Comment: *

Name: *

Email: *

Verification: *

The risk manager completes risk response planning. The risk manager believes that to effectively address all eventualities, an additional action is required.
What should the program manager do next?

• A.Perform a final review of project scope
• B.Transfer a percentage of known risks
• C.Establish a contingency reserve
• D.Avoid known critical project threats.

Comment: *

Name: *

Email: *

Verification: *

An ICT distribution designer is representing a client during a project execution.
What is the designer's role in the Vendor and Contractor Coordination?

• A.Synchronizes the daily activities of all trades through daily or weekly meetings (depending on project size, complexity, or criticality) with individual trade PMs. Fore people, supervisors and designers as necessary
• B.Holds two critical meetings to begin the project and allow all parties to introduce themselves. The first meeting usually is conducted with the owner and design team, and the second meeting is with the field personnel and subcontractors
• C.Oversee the sequence of the work and ensure that the job proceeds as anticipated in accordance with the project execution schedule
• D.If specific questions arise regarding coordination of the installation with structural, architectural, and site conditions and work between trades, submit RFIs to the GC with appropriate documentation to demonstrate the concern along with the proposed installation.

Comment: *

Name: *

Email: *

Verification: *

Before working on equipment, what is the FINAL step in the lockout/tagout (LOTO) procedure?

• A.Confirm the device is de-energized by proving it will not run when started.
• B.Train workers to perform the LOTO process.
• C.Confirm all unnecessary items have been removed from the area.
• D.Apply appropriate tags both locally and remotely.
• E.Verify the equipment controls are in the proper operating position.

Comment: *

Name: *

Email: *

Verification: *

Telecommunications cabling (e.g., voice, data, video, security, audio, control) can be damaged during the construction phases of rough-in, drywall installation, and during the siding of the exterior. For these reasons, telecommunications cabling shall be acceptance tested. Acceptance testing includes visual examination and verification of all cabling and qualification of copper cabling for data cabling or certification of copper or optical fiber cabling for data cabling.
Verification testing is generally performed in which two of the following steps? (Choose two.)

• A.During the trim-out stage of the cabling after painting
• B.Post the implementation of the construction
• C.Prior to the installation of the cable tray system for spurs, points that would or could damage the cable infrastructure
• D.Post the acceptance of the construction contract once the Project Manager has approved this phase
• E.Prior to the installation of insulation and drywall

Comment: *

Name: *

Email: *

Verification: *