What is the MAIN concern with a poke-thru installation?

• A.The diameter of the poke-thru device
• B.The fact that it is beneath the floor
• C.The compatibility with the telecommunications outlet/connector
• D.The structural integrity of the floor assembly

Comment: *

Name: *

Email: *

Verification: *

What is the MAXIMUM length of continuous conduit allowed before a pull point or pull box needs to be installed?

• A.22.90 m (75 ft)
• B.45.70 m (150 ft)
• C.15.20 m (50 ft)
• D.30.50 m (100 ft)

Comment: *

Name: *

Email: *

Verification: *

To accommodate telephone, data, CATV, security and multimedia, a MINIMUM of ________ strands of optical fiber auxiliary disconnect outlet (ADO) cable should be
provided.

• A.Eight
• B.Six
• C.Four
• D.Five
• E.Two

Comment: *

Name: *

Email: *

Verification: *

Where would an ICT distribution designer working for a company responding to a RFP expect to find requirements concerning alternative dispute resolution in the scope of work (SOW)?

• A.It would not be expected in the scope of work (SOW).
• B.It would be expected in the part of the scope of work (SOW) delineating acceptance requirements.
• C.It would be expected in the section of the scope of work (SOW) containing legal requirements.
• D.It would be expected in the portion of the scope of work (SOW) containing technical considerations.

Comment: *

Name: *

Email: *

Verification: *

What's the RECOMMENDED twisted pair cable slack length to be left at the work area outlet location to enable the possibility of future changes in the Horizontal Cabling System?

• A.=0.3 m (1 ft)
• B.=0.152 m (0.5 ft)
• C.= 5m (16 40 ft)
• D.=1 m (3 ft)

Comment: *

Name: *

Email: *

Verification: *