An administrator is implementing VLT in OS10. What type of port-channel must they configure for the VLTi?

• A.Trunking and one (1) native VLAN need to be defined on the port-channel.
• B.None, a port-channel is created automatically during VLT discovery.
• C.Administrator needs to configure a LACP Port-Channel.
• D.Administrator needs to configure a static Port-Channel.

Comment: *

Name: *

Email: *

Verification: *

A customer reports they can no longer access their services and a network administrator has been assigned to investigate. A UFD disabled error status appears on all ports. What caused the issue?

• A.There was no issue; this is normal behavior.
• B.Spanning tree Loop-guard was implemented on the uplink-state group.
• C.Both a port channel and its members were assigned to an uplink-state group.
• D.One of the upstream interfaces is an uplink-state group went down.

Comment: *

Name: *

Email: *

Verification: *

A network administrator enters the BGP command neighbor 10.0.2.1. The BGP router does NOT have any route to the 10.0.2.0 network. What will happen?

• A.It will send gratuitous ARP messages to attempt to discover a route to its 10.0.2.1 neighbor.
• B.The router will not form a successful adjacency with its 10.0.2.1 neighbor.
• C.It will send an ICMP packet to attempt to reach its 10.0.2.1 neighbor.
• D.The router will form a successful adjacency with its 10.0.2.1 neighbor. The BGP state will be listed as connect.

Comment: *

Name: *

Email: *

Verification: *

How are multiple hardware based ACLs filtered?

• A.NTP
• B.DHCP
• C.NPU
• D.IP

Comment: *

Name: *

Email: *

Verification: *

What is the maximum number of LLDP neighbors supported per system with OS10?

• A.512
• B.384
• C.250
• D.256

Comment: *

Name: *

Email: *

Verification: *