Refer to the exhibit.

Where is the rendezvous point for the group 239.255.255.250?

• A.eth1/1/54
• B.10.0.13.1
• C.vlan300
• D.10.0.14.1

Comment: *

Name: *

Email: *

Verification: *

A customer has disabled LLDP on the management interface of the switch. What is the proper command to re- enable it?

• A.OS10(config)# lldp enable OS10(config)#lldp transmit OS10(config)#lldp receive
• B.OS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)#lldp med enable OS10(conf-if-ma-1/1/1)#lldp timer 10
• C.OS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)#lldp transmit OS10(conf-if-ma-1/1/1)#lldp receive
• D.OS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)#lldp tly-select OS10(conf-if-ma-1/1/1)#lldp dot1tlv

Comment: *

Name: *

Email: *

Verification: *

You have been asked to examine a BGP configuration for a co-worker who is having difficulty establishing BGP peering. The address shown is that of the neighbor's Lo0 interface. Given the configuration shown, what would be your recommendation?
S3(config-router-bgp-65042)# neighbor 192.168.32.1
S3(config-router-neighbor)# remote-as 65042

• A.Modify the existing configuration to be:
  S3(config-router-bgp-65042)# neighbor 192.168.32.1/24 S3(config-router-neighbor)# peer-as 65042
• B.Add the following to the existing configuration: S3(config-router-neighbor)# update-source loopback 0 S3(config-router-neighbor)# no shutdown
• C.Issue the no shutdown command and verify that the BGP state is ESTABLISHED
• D.Issue the no shutdown command and verify that the BGP state is ACTIVE

Comment: *

Name: *

Email: *

Verification: *

How are ACLs processed?

• A.LIFO
• B.FIFO
• C.Sequentially
• D.Randomly

Comment: *

Name: *

Email: *

Verification: *

What is the default PIM-SSM IP range?

• A.224.0.0.0/4
• B.224.0.0.0/24
• C.232.0.0.0/8
• D.232.0.0.0/4

Comment: *

Name: *

Email: *

Verification: *