Which attributes are true about UDP? (Choose two.)

• A.connectionless
• B.requires an established connection
• C.used for latency-sensitive traffic
• D.uses sequence numbers
• E.supports retransmission

Comment: *

Name: *

Email: *

Verification: *

A customer is about to connect a new CX 6200 switch using ports 1/1/47 and 1/1/48 to an existing 5406R in a VSF configuration. The VSF is already configured with the following settings:
trunk 1/A24, 2/A24 trk2
trk2
vlan tagged 100,200,300
vlan untagged 50
What needs to be configured on the new CX 6200 switch?

• A.!
  interface lag 27
  vlan trunk allowed 50,100,200,300
  vlan trunk native 50
  !
• B.!
  interface lag 27
  lacp mode static
  vlan trunk allowed 50,100,200,300
  vlan trunk native tagged 50
  !
• C.!
  interface lag 27
  vlan trunk allowed 100,200,300
  vlan trunk native 50
  !
• D.!
  interface lag 27
  lacp mode static
  vlan trunk allowed 50,100,200,300
  vlan trunk native untagged 50
  !

Comment: *

Name: *

Email: *

Verification: *

A Network Technician needs to configure a default route on a branch office switch. All traffic that is not destined for a local, directly connected network should be sent to the firewall at IP address
172.16.254.1. Which command correctly configures this static default route?

• A.`ip route 0.0.0.0/0 172.16.254.1`
• B.`ip route 172.16.254.1 0.0.0.0/0`
• C.`ip route any any 172.16.254.1`
• D.`ip default-gateway 172.16.254.1`

Comment: *

Name: *

Email: *

Verification: *

A retail store chain customer is replacing 1,479 AOS-S switches with HPE Aruba Networking CX
6000 switches. The customer is interested in utilizing ZTP to provision the new switches. Still, they are concerned about when the switch starts the ZTP process and whether the ZTP may change configurations on the switches already deployed. What would address this concern?

• A.If the ZTP operation detects that the switch has already been added to Aruba Networking Central, the ZTP operation ends.
• B.If the ZTP operation detects that the switch configuration is different from the factory default configuration, the ZTP operation ends.
• C.If the ZTP operation detects that ztp force-provisioning is set, software and configuration are automatically deployed, and the ZTP operation starts.
• D.If the ZTP operation detects that the DHCP option provided by the TFTP server already has the switch serial number assigned as a configuration file, the ZTP operation ends.

Comment: *

Name: *

Email: *

Verification: *

Which aspect of Layer 3 analysis involves evaluating the operation and effectiveness of protocols such as RIP, OSPF, EIGRP, and BGP in dynamically exchanging routing information and building routing tables?

• A.Route redistribution
• B.Routing convergence
• C.Routing protocols
• D.Routing table analysis

Comment: *

Name: *

Email: *

Verification: *